High Performance Coatings

High Performance Coatings

Set Descending Direction
View as Grid List

32 Items

per page
  1. SS-1000 2 Part Vibration/Shock Dampening Coating
    SS-1000 is a fast curing clear silicone coating developed for shock dampening and vibration isolation applications. SS-1000 is a 2-part silicone vibration dampener that when cured, allows handling of the parts within minutes. A dispensing gun is required for the clear rubber coating's dual syringes.
    Typical Applications
    • Vibration isolation
    • Severe impact cushioning
    • Dampening of severe shock

    Starts at $14.97

  2. SS-101 Vibration And Shock Dampening Rubber Coating/Dip
    SS-101 is a fast curing rubber coating developed for shock dampening and vibration isolation applications. SS-101 is a 1-part silicone liquid rubber dip that allows handling of the parts within hours. The SS-101 liquid rubber coating works well in manual and automatic dispensing equipment.
    Typical Applications
    • Vibration isolation
    • Severe impact cushioning
    • Dampening of severe shock

    Starts at $14.69

  3. SS-18 2 Part Neutral Cure Self-Leveling Adhesive, 60 Minute Deep Section Cure At Room Temperature
    SS-18 is a fast, neutral curing silicone RTV adhesive developed for applications requiring fast deep section cures and excellent adhesion. SS-18 is a 2-part, 1:1 mix ratio silicone adhesive that when mixed and applied to the substrate, allows handling within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the neutral silicone adhesive dual syringes.
    Typical Applications
    • Adhesive encapsulation
    • Assembly line adhesive
    • Form in place gaskets

    Starts at $13.68

  4. SS-1801 Radiator And Charged Air Cooler Coating
    SS-1801 is a fast curing silicone RTV adhesive rubber developed for radiator and coolant leak sealing applications that require fast development of physical properties and excellent adhesion. SS-1801 is a 2-part, 1:1 mix ratio silicone radiator sealer that when mixed and applied to the substrate, allows handling of the coated assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures, making it an excellent radiator leak sealer and coolant leak sealer. A dispensing gun is required for the dual syringes on this coolant and radiator crack sealer.
    Typical Applications
    • Adhesive sealing of metal parts
    • Assembly line coating
    • Charged air cooler and radiator silicone sealant adhesive coating

    Starts at $16.39

  5. SS-1801F Fast Cure Radiator And Charged Air Cooler Coating
    SS-1801F is a fast curing silicone RTV adhesive rubber developed for radiator leak sealing applications that require fast development of physical properties and excellent adhesion. SS-1801F is a 2-part, 1:1 mix ratio grey silicone sealant that when mixed and applied to the substrate, allows handling of the coated assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes of the radiator crack sealant.
    Typical Applications
    • Adhesive sealing of metal parts
    • Assembly line coating
    • Radiator and charged air cooler adhesive sealer coating

    Starts at $18.04

  6. SS-19 2 Part Neutral Cure Thixotropic Adhesive, 60 Minute Deep Section Cure At Room Temperature
    SS-19 is a fast curing silicone RTV thixotropic adhesive developed for applications requiring fast deep section cures and excellent adhesion. SS-19 is a 2-part, 1:1 mix ratio black silicone adhesive, that when mixed and applied to the substrate, allows handling within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.
    Typical Applications
    • Adhesive encapsulation
    • Assembly line adhesive
    • Form in place gaskets

    Starts at $15.33

  7. SS-222 2-Part Low Viscosity Dip Coating Silicone Rubber

    SS-222 is a heat curing, silicone RTV adhesive rubber developed for coating applications requiring a low viscosity silicone dip coating product. A dispensing gun is required for the dual syringes on this silicone dip coating product.

    Typical Applications
    • Silicone rubber coated handles
    • Silicone gasket fabrication
    • Coating glass bakeware

    Starts at $17.14

  8. SS-3000 Sprayable Military Undercoating
    SS-3000 is a fast cure silicone RTV rubber developed for spray coating applications. This sprayable silicone rubber is an excellent vehicle undercoating product.
    Typical Applications
    • Military vehicle undercoating spray
    • Aircraft interior noise reduction
    • Vehicle interior sound dampening

    Starts at $14.47

  9. SS-3001 Sound Dampening Silicone Rubber Coating
    SS-3001 is a fast cure silicone RTV rubber developed for sound dampening spray coating applications. SS-3001 is a 1-part silicone that when cured, acts as a spray on sound deadener spray with the properties of a fireproof rubber coating.
    Typical Applications
    • Vehicle undercoating
    • Aircraft interiors noise reduction
    • Vehicle interior spray sound deadener

    Starts at $164.80

  10. SS-3002 Fire Resistant Silicone Coating
    SS-3002 is a fast cure silicone RTV rubber developed for coating applications where the substrate needs to be fireproof.
    Typical Applications
    • Silicone waterproof spray for tents and shelters
    • Interior partition thermal and sound insulation
    • Metal corrosion resistance for vehicles

    Starts at $166.45

  11. SS-3003 2 Part Low Durometer Silicone Rubber
    SS-3003 is a heat curing, high strength silicone RTV adhesive developed for applications requiring a tough, low durometer silicone rubber product. SS-3003 is a 2-part silicone that when heat cured, allows handling of the parts within minutes. A dispensing gun is required for the dual syringes.
    Typical Applications
    • Silicone rubber parts
    • Silicone gasket fabrication
    • Prosthetic components

    Starts at $14.53

  12. SS-3004 Silicone Rubberized Acid Resistant Coating
    SS-3004 is a fast cure chemical-resistant silicone RTV rubber developed for coating applications where protection from acids is required.
    Typical Applications
    • Protection of concrete and brick
    • Interior partition thermal and acid insulation
    • Metal corrosion resistance for vehicles

    Starts at $173.13

  13. SS-3005 Silicone Rubberized Thermally Conductive Coating
    SS-3005 is a fast cure RTV rubberized silicone developed for thermally conductive applications. This thermally conductive silicone rubber adheres well to metals and composite substrates.
    Typical Applications
    • Solar unit fabrication
    • Component thermal dissipation
    • Automotive and specialty assembly heat transfer

    Starts at $189.11

  14. SS-3020 2 Part Very Low Durometer Silicone Rubber
    SS-3020 is a heat curing, high strength silicone RTV adhesive rubber developed for silicone rubber applications requiring a clear, tough rubber product. SS-3020 is a 2-part silicone rubber that when cured, allows handling of the parts within minutes A dispensing gun is required for the 2-part silicone dual syringes.
    Typical Applications
    • Soft silicone rubber parts
    • Cushions and grips
    • Prosthetic components

    Starts at $14.52

  15. SS-3303 2 Part Low Durometer Silicone Rubber
    SS-3303 is a heat curing, high strength silicone RTV adhesive rubber developed for applications requiring a tough low durometer silicone rubber product. SS-3303 is a 2-Part low durometer silicone rubber that when heat cured, allows handling of the parts within minutes. A dispensing gun is required for the dual syringes.
    Typical Applications
    • Silicone rubber parts
    • Silicone gasket fabrication
    • Prosthetic components

    Starts at $19.92

  16. SS-3333 High Tack Coating for Sports Gloves and Apparatus
    SS-3333 is a heat curing, high strength silicone adhesive rubber developed for high tack adhesive coating applications requiring a tough rubber product.
    Typical Applications
    • Wide receiver glove glue
    • Hockey stick handles
    • Temporary high tack silicone adhesive

    Starts at $64.27

  17. SS-34 Ship-Slide Professional Marine Anti-Foulant & Rust Resistant Coating

    SS-34 is an anti-foulant and rust resistant silicone coating. It is an easy to use 1:1 mix, 2-part liquid that when mixed, applied and cured, results in a silicone rubber coating that repels bio-fouling. Being too slippery to attach to, barnacles, zebra mussels and sea-life slide off with the least current. In ships, this and other boat anti-fouling products keep hulls and running gear clean while offering enhanced cruising range via reduced buildup on the hull when moving through the water.

    Typical Applications
    • All fresh and saltwater shipping
    • MRO operations on ships
    • Docks - piers - tugs - port operations

    Starts at $96.41

  18. SS-390D Smart Washer Liquid Indicating Silicone Rubber
    SS-390D is a 1-part orange RTV silicone developed for filling smart washer cavities. SS-390D, liquid silicone rubber, offers unprimed adhesion to many metals and plastics.
    Typical Applications
    • Smart washer assemblies
    • Indicating devices
    • Tamper evident packaging

    Starts at $26.78

  19. SS-4000 Silicone RTV Roof-Coat Rubber
    SS-4000 is a tough silicone RTV liquid roof coating rubber.
    Typical Applications
    • Flat roofing
    • Valleys
    • Repair compound
    • Leak seeking liquid roof coating

    Starts at $168.10

  20. SS-5000A Silicone Slip Clean Hull and Anti-Fouling Coating

    SS-5000A is a clear rubber antifouling coating based on polydimethylsiloxane technology. This anti-fouling coating offers a non-staining effect to boat hulls, anti-fouling to the hull and running gear while offering enhanced cruising range and ship speed through reduced friction of the hull through the water. If you are looking for an antifouling coating for buoys, piers, docks, filtration systems, or anything else, our SS-567 silicone antifouling coating is a great choice as well.

    Typical Applications
    • Ship hull anti-fouling
    • Propeller anti-fouling
    • Ship friction reducer
    • Essential in warm waters

    Starts at $73.54

  21. SS-5005 Self-leveling Silicone RTV Adhesive Coating
    SS-5005 is a 1-part neutral cure silicone adhesive RTV developed for coating applications.
    Typical Applications
    • Coating assemblies
    • Industrial sealing
    • Thin section potting & encapsulation

    Starts at $7.00

  22. SS-5088 UV Dual Cure Silicone Adhesive Sealant
    SS-5088 is a UV dual cure neutral silicone RTV adhesive rubber developed for UV applications.
    Typical Applications
    • Assembly line adhesive
    • Form in place gaskets
    • Silicone adhesive sealant

    Starts at $12.37

  23. SS-5293 UV Dual Cure Adhesive - 3 Oz Tube - Loctite 5293 Offset
    SS-5293 is a UV dual cure neutral silicone RTV adhesive rubber developed for applications requiring fast cure. SS-5293 is a 1-part silicone that when applied and cured, allows handling of the bonded assembly within seconds. A secondary moisture cure enables full curing of this Loctite UV glue in shadowed areas. This Loctite UV cure adhesive works well in manual and automatic dispensing equipment.
    Typical Applications
    • Assembly line adhesive
    • Conformal coating
    $21.21
  24. SS-5293-3000 UV Dual Cure Adhesive, 3,000Cps, 3 Oz Tubes Only
    SS-5293-3000 is a UV dual cure neutral silicone RTV adhesive rubber developed for UV applications. SS-5293-3000 is a 1-part clear RTV silicone adhesive that when applied to the substrate allows handling of the bonded assembly within seconds. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. SS-5293-3000 UV curing adhesive works well in manual and automatic dispensing equipment.
    Typical Applications
    • Assembly line adhesive
    • Form in place gaskets
    • Adhesive sealant
    $22.37
  25. SS-5600 2-Part Fast Cure Adhesive
    SS-5600 is a fast curing adhesive silicone RTV developed for applications requiring fast deep section cures as well as excellent adhesion. SS-5600 is a 2-part, 1:1 mix silicone adhesive that when mixed and applied to the substrate, allows handling within minutes. A dispensing gun is required for the dual syringes on this 2-part adhesive mixture.
    Typical Applications
    • Adhesive encapsulation
    • Assembly line adhesive
    • Form in place gaskets

    Starts at $16.22

  26. SS-567 Foul-Off Municipal Marine Anti-Foulant Coating
    SS-567 is a clear rubber silicone antifouling boat paint based on polydimethylsiloxane technology. It offers marine anti-fouling to: locks, buoys, piers, docks, waterways, filtration systems, dams, and many others. This marine anti-fouling paint is too slippery to attach to.
    Typical Applications
    • Water intake valves at dams
    • Water filtration systems
    • Ship hull anti-fouling
    • Propeller antifouling coating
    • Hydroelectric power stations
    • Water supply equipment and piping

    Starts at $133.90

  27. SS-690 High Temperature Coating
    SS-690 is a fast cure silicone RTV rubber developed for coating applications to resist weathering, moisture, UV and temperatures up to 330C. SS-690 will bond to ceramic, metals and composites to form a high temperature coating that can be utilized within 24 hours of application.
    Typical Applications
    • Flue gas handling and ducting
    • Smokestacks
    • Protecting ceramic and metal stacks from corrosion and premature wear

    Starts at $11.15

  28. SS-6A 1 Part Fast Cure High Temperature Coating
    SS-6A is a fast curing silicone RTV coating developed for applications requiring fast development of physical properties and fast unprimed adhesion
    Typical Applications
    • Industrial-Strength High Temperature Silicone Coating
    • Coating Gaskets
    • Adhesive Sealant

    Starts at $9.65

  29. SS-6B Clear 1 Part Fast Cure High Temperature Coating
    SS-6B Clear is a fast curing RTV silicone coating developed for applications requiring fast development of physical properties and fast unprimed adhesion. Order this high temperature clear coat in either 8 ounce, 16 ounce, 1 gallon, or 5 gallon containers.
    Typical Applications
    • Industrial Coating
    • Coating Gaskets
    • Adhesive Sealant

    Starts at $10.82

  30. SS-713 Conformal Coating RTV
    SS-713 is a 1-part silicone RTV developed for adhesive conformal coating applications.
    Typical Applications
    • Coating electronic assemblies
    • Industrial coating and sealing
    • Thin section potting and encapsulation

    Starts at $11.59

  31. SS-890SL Self-leveling Expansion Joint Seal Silicone RTV - DC 890-SL Offset
    SS-890SL is a self-leveling silicone RTV designed for sealing expansion joints.
    Typical Applications
    • Sealing road expansion joints
    • Sealing concrete new construction
    • Sealing shop floor seams

    Starts at $12.73

  32. TS-59 Concrete Coating RTV
    TS-59 is a 1-part RTV silicone concrete sealer developed for concrete coating applications.
    Typical Applications
    • Coating concrete
    • Industrial coating and sealing
    • Foundation waterproofing

    Starts at $270.48

Set Descending Direction
View as Grid List

32 Items

per page