SS-101 Vibration And Shock Dampening Rubber Coating/Dip
Starts at $22.66
Product Description
SS-101 is a fast curing rubber coating developed for shock dampening and vibration isolation applications. SS-101 is a 1-part silicone liquid rubber dip that allows handling of the parts within hours. The SS-101 liquid rubber coating works well in manual and automatic dispensing equipment.
Product features
- Room Temperature cure silicone dip coating
- Liquid rubber dip for coating items
- Moisture cure
Typical Applications
- Vibration isolation
- Severe impact cushioning
- Dampening of severe shock
- UNCURED
- Specific Gravity: 1.05
- Uncured Color: Translucent
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 1,000 cps.
- Tack Free Time: 30-60 minutes
- CURED - R.T.
- Cured: < 8 hours
- Cured Color: Translucent + Custom Colors Upon Request
- Durometer, Shore: N/A
- Coefficient of Thermal Expansion: -5
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured silicone rubber coating can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerﾒs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.