SS-1801F Fast Cure Radiator And Charged Air Cooler Coating
Starts at $24.24
Product Description
SS-1801F is a fast curing silicone RTV adhesive rubber developed for radiator leak sealing applications that require fast development of physical properties and excellent adhesion. SS-1801F is a 2-part, 1:1 mix ratio grey silicone sealant that when mixed and applied to the substrate, allows handling of the coated assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes of the radiator crack sealant.
Product features
- Highest OAT fluid resistance
- Fast deep section cure
- Self-leveling
- Neutral cure
- Excellent unprimed adhesion to metal radiator assemblies
- Long term high temperature stability in the field
Typical Applications
- Adhesive sealing of metal parts
- Assembly line coating
- Radiator and charged air cooler adhesive sealer coating
- UNCURED
- Specific Gravity: 1.25
- Uncured Color: Gray
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 6 months from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 10,000 cps.
- Tack Free Time: <4 Minutes at Room Temperature
- CURED - R.T.
- Cured: 24 Hours @ Room Temperature
- Cured Color: Silver
- Durometer, Shore: A 25
- Thermal Conductivity: 0.0005
- Coefficient of Thermal Expansion: -5
Very firm deep section cures are formed in 15 minutes. Ultimate cured properties are found in 24 hours.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 6 months from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerﾒs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.
Similar Products
