SS-301AP Plastics Bonding Silicone Adhesive RTV
Product Description
SS-301AP is a fast curing RTV silicone adhesive rubber developed for difficult to bond to plastics applications, like Tygon™. SS-301AP is a 1-part silicone adhesive for plastics that when applied to the substrate allows handling of the bonded assembly within an hour. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. The SS-301AP silicone sealant for plastic works well in manual and automatic dispensing equipment.
Product features
- Fast RT cure
- Thixotropic paste
- Excellent unprimed silicone glue for plastic, filled polyethylene, filled polypropylene, and most composites
- Rapid onset of adhesion
- High temperature resistant
- Non-corrosive oxime cure
- Bonds to Tygon™ and other highly plasticized plastics
Typical Applications
- Industrial bonding
- Form in place gaskets
- Adhesive Sealant
- UNCURED
- Specific Gravity: 1.28
- Uncured Color: White
- Solids: 96.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 400,000 cps.
- Tack Free Time: 20 Minutes
- CURED - R.T.
- Cured: 72 Hours @ Room Temperature
- Cured Color: White
- Durometer, Shore: A 35
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerﾒs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.
Similar Products
