SS-3005 Silicone Rubberized Thermally Conductive Coating
Product Description
SS-3005 is a fast cure RTV rubberized silicone developed for thermally conductive applications. This thermally conductive silicone rubber adheres well to metals and composite substrates.
Product features
- Thermally conductive rubber
- Fast room temperature cure
- Exceptional abrasion resistance
- Sprayable thermal conductive coating
- Excellent adhesion to metal and composite substrates
Typical Applications
- Solar unit fabrication
- Component thermal dissipation
- Automotive and specialty assembly heat transfer
- UNCURED
- Specific Gravity: 1.25
- Uncured Color: Gray
- Solids: >50% solids, contains no VOC solvents
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 8,000 cps.
- Tack Free Time: 20 Minutes
- CURED - R.T.
- Cured: 72 Hours @ Room Temperature
- Cured Color: Gray
- Durometer, Shore: A 38
- Thermal Conductivity: 0.63
- Coefficient of Thermal Expansion: -5
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep silicone rubber sealant out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.