SS-5000B Silicone Slip Clean Hull and Anti-Fouling Coating - 8 Oz Container
$31.05
Product Description
SS-5000B is a clear rubber coating based on polydimethylsiloxane technology. It offers a non-staining effect to boat hulls, anti-fouling to the hull and running gear while offering enhanced cruising range and ship speed through reduced friction of the hull through the water.
Product features
- Clear, colorless liquid
- Self-bonding to all marine substrates
- Non-organic
- Low surface energy
- Helps repel sea-life, barnacles and scum
- In addition to hulls, it's effective on propellers and running gear
- Increases speed, fuel efficiency and cruising range
- Non-toxic inert coating
- Works without copper or other heavy metal poisons
- Reduces stains on hulls
Typical Applications
- Ship hull anti-fouling
- Propeller anti-fouling
- Ship friction reducer
- Essential in warm waters
- UNCURED
- Specific Gravity: 0.9
- Uncured Color: Clear
- Solids: 50.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- CURED - R.T.
- Cured: 20-30 Minutes at 70°F
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerﾒs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.