SS-38 Masking RTV, Peelable Cure In Place Rubber For Plating And Coating
Product Description
SS-38 is a peelable silicone RTV developed for applications requiring a form fitting temporary protective cover. SS-38 is a 1-part silicone adhesive that when applied to the substrate, cures to a pliable, removable, protective covering within a day. When cured, this peelable rubber coating resists weathering, ozone, moisture, UV and high temperatures. ***Peelable mask for conformal coating does not peel well off of some glass products***
Product features
- Fast RT cure
- Light paste
- Clean release from plastics, metals, and painted wood
- Non-corrosive oxime cure
Typical Applications
- Peelable protective mask covering for sandblasting
- Metal masking for plating operations
- Peelable silicone sealant for temporary weatherstripping
- UNCURED
- Specific Gravity: 0.98
- Uncured Color: Translucent, with custom colors available
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 80,000 cps
- Tack Free Time: 20 Minutes
- CURED - R.T.
- Cured: 72 Hours @ Room Temperature
- Cured Color: Translucent + Custom Colors Upon Request
- Durometer, Shore: A 30
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.