SS-30 High Temperature, Oil Resistant Adhesive Sealant - 77 Ultra Blue Offset
Product Description
SS-30 is a fast curing silicone RTV high heat adhesive rubber developed for automotive gasketing applications requiring fast development of physical properties and fast unprimed adhesion. When this heat resistant sealant is cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. SS-30 is also designed as a superior oil resistant RTV silicone sealant.
Product features
- Fast RT cure
- Thixotropic high temp adhesive paste
- Excellent unprimed adhesion to plastic, metal and glass
- Very fast onset of adhesion
- Exceptional oil resistance
- Good hydrolytic stability
- Heat resistant sealant able to bond through oil
- Non-corrosive oxime cure
Typical Applications
- Aftermarket heat resistant adhesive sealant
- Automotive form in place gaskets made from oil resistant silicone
- Situations where the gasket flange is contaminated with oil
- UNCURED
- Specific Gravity: 1.28
- Uncured Color: Black, Blue, Red, Gray, Copper + custom colors
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 400,000 cps.
- Tack Free Time: 14 Minutes
- CURED - R.T.
- Cured: 72 Hours @ Room Temperature
- Cured Color: Black, Blue, Red, Gray + Custom Colors Upon Request
- Durometer, Shore: A 38
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep ultra-high temperature sealant out of the reach of children. Uncured high heat sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.