SS-2001 Fire Barrier Silicone RTV Foam - Fire Barrier 2001 Offset
Product Description
The SS-2001 fire barrier foam sealant was designed to seal large and/or complex penetrations such as cable bundles, trays, and conduit bundles and multiple pipes runs while sealing out fire, smoke, and noxious gases. A dispensing gun is required for the dual syringes of this fire barrier foam. If you need a fire resistant coating that does not require a dispensing gun, view our SS-3002 spray-on silicone.
Product features
- Two part 1:1 mix
- Foams in place to seal complex assemblies
- Cures in ~1 minute to form a seal
- Re-enterable/repairable
- Fire resistant foam also has excellent sound barrier properties
- No ampacity derating of cables when used properly
- Fire sealant foam provides up to a 3 hour fire rating
- Easily mixed by hand or automated mixing and dispensing equipment
Typical Applications
- Fills fire stops of fire walls
- Seals wire pass throughs and heater vents
- Foam seal gas vent stacks
- UNCURED
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Tack Free Time: 1 Minute at Room Temperature
- CURED - R.T.
- Cured: 1 to 5 Minutes at Room Temperature
- Cured Color: White, with custom colors available
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.