SS-1000 2 Part Vibration/Shock Dampening Coating
Product Description
SS-1000 is a fast curing clear silicone coating developed for shock dampening and vibration isolation applications. SS-1000 is a 2-part silicone vibration dampener that when cured, allows handling of the parts within minutes. A dispensing gun is required for the clear rubber coating's dual syringes.
Product features
- Room temperature cure or fast heat cure
- Convenient 1:1 mix ratio
- Pourable and self-leveling
- Platinum addition cure
Typical Applications
- Vibration isolation
- Severe impact cushioning
- Dampening of severe shock
- UNCURED
- Specific Gravity: 1.05
- Uncured Color: Translucent, with custom colors available
- Solids: >99%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 10,000 cps.
- Tack Free Time: 15 Minutes at Room Temperature
- CURED - R.T.
- Cured: 5 Minutes at 150°C
- Cured Color: Translucent + Custom Colors Upon Request
- Coefficient of Thermal Expansion: -5
Platinum catalyzed, addition cure system
Avoid contact with tin cured RTVs, sulphur compounds, azides, imides, latex rubber gloves, and amines as 2-part epoxt coating cure system can be deactivated.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerﾒs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.
Similar Products
