SS-261 1 Part Heat Cure, Electrically Conductive, Silver Filled Adhesive. Must Be Kept Frozen!
Starts at $420.70
Product Description
SS-261 is an electrically conductive, heat curing adhesive silicone. SS-261 is a 1-part silicone that when applied to the substrate allows handling of the assembly within an hour.
Product features
- Heavy paste
- Heat cured adhesive with high temperature resistance
- Non-corrosive
Typical Applications
- Form in place gaskets
- EMI/RFI silicone shielding
- Electrically conductive sealant
- UNCURED
- Specific Gravity: 3.06
- Uncured Color: Silver-Tan
- Solids: 100.00%
- Shelf Life: Sealed containers are guaranteed for 6 months from the ship date when stored in a freezer
- Viscosity: 400,000 cps.
- Tack Free Time: >24 Hours at Room Temperature
- CURED - R.T.
- Cured: 45 Minutes at 115°C
- Cured Color: Silver-Tan
- Durometer, Shore: A 70
- Volume Resistivity:
Platinum catalyzed silver filled epoxy
Avoid contact with tin cured RTVs, sulphur compounds, azides, imides, latex rubber gloves, and amines as cure system can be deactivated.
Sealed containers are guaranteed for 6 months from the ship date when stored in a freezer
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.