SS-713 Conformal Coating RTV
Product Description
SS-713 is a 1-part silicone RTV developed for adhesive conformal coating applications.
Product features
- Low viscosity
- Fast, room temperature cure
- Self-leveling liquid RTV
- Neutral cure
- Silicone fluoresces under UV light to enable coating inspection
- Adhesion to metals and many plastics
Typical Applications
- Coating electronic assemblies
- Industrial coating and sealing
- Thin section potting and encapsulation
- UNCURED
- Specific Gravity: 0.98
- Uncured Color: Clear, with custom colors available
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 3,000 cps.
- CURED - R.T.
- Cured: 24 Hours @ Room Temperature
- Cured Color: Clear + Custom Color Upon Request
- Durometer, Shore: A 25
- Dielectric Strength: 20 kv/mm
- Dielectric Constant: 3.1
- Dissipation Factor: 0.01
- Volume Resistivity: 15
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured silicone modified conformal coating can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerﾒs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.