SS-1C51 1 Part Self-Leveling Heat Cure Adhesive Sealant - Humiseal 1C51 Offset
Product Description
SS-1C51 is a 1-part silicone RTV developed for conformal coating applications. SS-1C51, a clear silicone glue, offers unprimed adhesion to metals and many plastics. Heated cures result in a tough and durable humiseal conformal coating or potting adhesive.
Product features
- Neutral Addition Cure
- Fast heat cure
- Self-leveling liquid RTV
- Fluoresces under UV light to enable coating inspection
- Adhesion to metals and many plastics
- Convenient 1 part system
Typical Applications
- Coating electronic assemblies
- Industrial coating and sealing
- Thin section potting & encapsulation
- UNCURED
- Specific Gravity: 0.98
- Uncured Color: Clear
- Solids: 100.00%
- Shelf Life: Sealed containers are guaranteed for 6 months from the ship date when stored in a cool dry area below 70°F.
- Viscosity: 400 cps.
- Tack Free Time: @ 130C 15 Minutes
- CURED - R.T.
- Cured: 20 mins. @ 130°C
- Cured Color: Clear
- Durometer, Shore: A 30
- Dielectric Strength: 13 kv/mm
- Dielectric Constant: 2.4
- Dissipation Factor: @ 1kHz 0.01
- Volume Resistivity: 34
- Thermal Conductivity: 0.0005
- Coefficient of Thermal Expansion: -5
Can be accomplished with heat to very rapid cures. Typical utilization involves dispensing in open air and oven, IR, or hot air curing.
Avoid contact with tin cured RTVs, sulphur compounds, azides, imides, latex rubber gloves, and amines as cure system can be deactivated.
Sealed containers are guaranteed for 6 months from the ship date when stored in a cool dry area below 70°F.
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerﾒs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.
Similar Products
