SS-153 1 Part Heat Cure For Encapsulating And Laminating. Must Be Refrigerated!
Starts at $20.88
Product Description
SS-153 is a heat curing silicone RTV adhesive rubber developed for bonding applications requiring encapsulation or deep section curing configurations. SS-153 is a 1-part silicone encapsulant that when applied to the substrate and thermally cured, allows handling of the bonded assembly within minutes.
Product features
- Cures in fully encapsulated assemblies
- Deep section cure
- Thixotropic 1-part RTV
- Silicone cures in Lamination assemblies
Typical Applications
- Silicone laminate for components
- Encapsulation fabrication bonding
- Bonds silicone to a variety of substrates
- UNCURED
- Specific Gravity: 1.04
- Uncured Color: Translucent, with custom colors available
- Solids: 100.00%
- Shelf Life: Sealed silicone bonder containers are guaranteed for 6 months from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 500,000 cps
- Tack Free Time: 7 Days at Room Temperature
- CURED - R.T.
- Cured: 15 Minutes at 150°C
- Cured Color: Translucent
- Durometer, Shore: A 15
- Thermal Conductivity: 0.0005
- Coefficient of Thermal Expansion: -5
Platinum catalyzed
Avoid contact with tin cured RTVs, sulphur compounds, azides, imides, latex rubber gloves, and amines as cure system can be deactivated.
Sealed silicone bonder containers are guaranteed for 6 months from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.