SS-34 2-Part Ship-Slide Professional Marine Anti-Foulant & Rust Resistant Coating
Product Description
SS-34 is an anti-foulant and rust resistant silicone coating. It is an easy to use 1:1 mix, 2-part liquid that when mixed, applied and cured, results in a silicone rubber coating that repels bio-fouling. Being too slippery to attach to, barnacles, zebra mussels and sea-life slide off with the least current. In ships, this and other boat anti-fouling products keep hulls and running gear clean while offering enhanced cruising range via reduced buildup on the hull when moving through the water.
Product features
- Non-toxic, clear and shiny
- Easy to apply liquid antifouling silicone coating
- Self-priming to marine surfaces
- Works well on hulls, props, control surfaces and running gear
- Reduces drag and friction
- Increases speed, fuel efficiency and cruising range
- Bio-fouling slides off when underway, too slippery to attach to
- Essential in warm waters
Typical Applications
- All fresh and saltwater shipping
- MRO operations on ships
- Docks - piers - tugs - port operations
- UNCURED
- Specific Gravity: 1.03
- Solids: >99%
- Shelf Life: 2 years from ship date when stored in a cool dry area below 70F
- Viscosity: 15,000-30,000
- CURED - R.T.
- Cured: 1.5 Hours
- Cured Color: Clear
Addition cure system
Keep out of reach of children. This is a platinum cure product which can be deactivated by exposure to sulfur containing compounds like thiols, sulfides, sulfates, organic rubber containing sulfur, nitrogen containing compounds like amines, amides, imides, azides, tin metals or compounds, or tin cured RTV's.
2 years from ship date when stored in a cool dry area below 70F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturer’s sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.