AA-3147 - DC3145 Offset
AA-3147 - DC3145 Offset
Starts at $21.94
AA-3147 is a high strength, neutral curing RTV silicone adhesive sealant developed for applications requiring fast development of physical properties and fast unprimed adhesion. AA-3147 is a 1-part industrial grade silicone adhesive sealant that allows handling of the bonded assembly within 1 hour of application to the substrate. When cured, the offset RTV DC3145 offset elastomer resists weathering, ozone, moisture, UV and high temperatures.
- Fast RT cure
- Thixotropic paste
- Excellent unprimed adhesion to plastic, metal and glass
- Fast onset of adhesion
- Non-corrosive oxime cure
- Conforms to Mil-A 46146B Groups I & II
- Conforms to Mil-A-46106B Groups I & II
- Assembly line adhesive
- Component assembly
- Industrial silicone adhesive sealant
- Specific Gravity: 1.12
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 500,000 cps
- Tack Free Time: 15 Minutes
- CURED - R.T.
- Cured: 72 Hours @ Room Temperature
- Cured Color: Translucent + custom colors available
- Durometer, Shore: A 50
- Dielectric Strength: 21 kV/mm
- Dielectric Constant: 3.2
- Dissipation Factor: 0.02
- Volume Resistivity: 15
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerﾒs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.