SS-35 Thermally Conductive Adhesive

Double click on above image to view full picture

Zoom Out
Zoom In

SS-35 Thermally Conductive Adhesive

SS-35    Technical Data Sheet    Safety Data Sheet
Size Price Qty
1 Oz Tube
3 Oz Tube
10.3 Oz Cartridge
10.3 Oz Euro Cartridge
1 Gallon
5 Gallons
- OR -

Product Description

SS-35 is a thermally conductive silicone RTV transfer adhesive rubber developed for heat sink applications. SS-35 is a 1-part silicone thermal conductive paste that when applied to the substrate enables adhesion to parts and heat transfer of the bonded assembly within minutes. When cured, the silicone lubricant grease resists weathering, ozone, moisture, UV and high temperatures.

Product Features

  • Fast RT cure
  • High thermal conductivity
  • Thixotropic thermally conductive paste
  • Excellent unprimed adhesion to plastic, metal and glass
  • Non-corrosive oxime cure

Typical Applications

  • PC board heat sink
  • Electronic component heat transfer
  • Adhesive sealing of components
  • Part fixturing with heat dissipation capability
  • Power unit adhesive

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • Specific Gravity: 1.62
  • Uncured Color: Gray
  • Solids: 98.00%
  • Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
  • Viscosity: 600,000 cps.
  • Tack Free Time: 20 Minutes
  • CURED - R.T.
  • Cured: 72 Hours @ Room Temperature
  • Cured Color: Gray
  • Durometer, Shore: A 40
  • Dielectric Strength: 23 kv/mm
  • Dielectric Constant: 3.3
  • Dissipation Factor: 0.007
  • Volume Resistivity: 1.8x1015
  • Thermal Conductivity: 0.63
  • Coefficient of Thermal Expansion: 17x10-5
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerï¾’s sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.
  • SS-2004
    SS-2004 Thermally Conductive Gap Filler - Bergquist 2000 Offset
    Starting at $24.52