SS-3045 1 Part Heat Cure, Thixotropic Adhesive.  Must Be Refrigerated!

Double click on above image to view full picture

Zoom Out
Zoom In

SS-3045 1 Part Heat Cure, Thixotropic Adhesive. Must Be Refrigerated!

SS-3045    Technical Data Sheet    Safety Data Sheet
Size Price Qty
1 Oz Tube
$13.49
3 Oz Tube
$24.48
10.3 ounces
$52.00
- OR -

Product Description

SS-3045 is a heat curing, high strength silicone adhesive rubber developed for applications requiring fast development of physical properties and excellent adhesion. SS-3045 is a 1-part silicone that when applied to the substrate and thermally cured, allows handing of the bonded assembly within minutes.

Product Features

  • Fast heat cure
  • Thixotropic paste
  • Excellent unprimed adhesion to metals and glass

Typical Applications

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • UNCURED
  •  
  • Specific Gravity: 1.08
  • Uncured Color: Translucent, with custom colors available
  • Solids: 100.00%
  • Shelf Life: Sealed containers are guaranteed for 6 months from the ship date when stored in a refrigerator
  • Viscosity: 500,000 cps
  • Tack Free Time: 5 Minutes at 150°C
  • CURED - R.T.
  •  
  • Cured: 15 Minutes at 150°C
  • Cured Color: Translucent + Custom Colors Upon Request
  • Durometer, Shore: A 30
  • Dielectric Strength: 500 V/mil
  • Dielectric Constant: 2.8
  • Dissipation Factor: 0.001
  • Volume Resistivity: 2.0 X 1014
  • Thermal Conductivity: 0.0005
  • Coefficient of Thermal Expansion: 20 x 10-5
Platinum catalyzed
Avoid contact with tin cured RTVs, sulphur compounds, azides, imides, latex rubber gloves, and amines as cure system can be deactivated.
Sealed containers are guaranteed for 6 months from the ship date when stored in a refrigerator
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerï¾’s sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.
  • SS-153
    SS-153 1 Part Heat Cure For Encapsulating And Laminating. Must Be Refrigerated!
    Starting at $14.36