SS-26S Electrically Conductive Silicone RTV
Starts at $331.78
Product Description
SS-26S is a very flexible moisture curing, electrically conductive silicone RTV. SS-26S is a 1-part electrically conductive RTV silicone that when applied to the substrate allows handling of the assembly within an hour. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.
Product features
- Very flexible
- Very high electrical conductivity
- Fast RT cure
- High temperature resistant
- Non-corrosive
- Very high thermal conductivity
Typical Applications
- Form in place gaskets
- Electrically conductive sealant
- EMI/RFI silicone shielding
- UNCURED
- Specific Gravity: 3.06
- Uncured Color: Silver-Tan
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 60,000 cps.
- Tack Free Time: 30 Minutes
- CURED - R.T.
- Cured: 72 Hours @ Room Temperature
- Cured Color: Silver-Tan
- Durometer, Shore: A 60
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep RFI protection out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.