Double click on above image to view full picture
SS-6B Clear 1 Part Fast Cure High Temperature Coating
Product DescriptionSS-6B Clear is a fast curing silicone RTV coating developed for applications requiring fast development of physical properties and fast unprimed adhesion.
- Fast room temperature cure
- Excellent unprimed adhesion to many composites, metals and glass
- Rapid onset of adhesion
- High temperature resistant
- Non-corrosive oxime cure
- Industrial Coating
- Coating Gaskets
- Adhesive Sealant
- Specific Gravity: 1.02
- Uncured Color: Clear
- Solids: 100.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 2,000 cps.
- Tack Free Time: 30 - 60 minutes
- CURED - R.T.
- Cured: 24 Hours @ Room Temperature
- Cured Color: Clear
- Durometer, Shore: A 30
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant irritates eyes and skin. Cure in well ventilated areas only.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerﾒs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.