SS-6664B Conformal Coating, Not For Deep Section Cure
Starts at $14.43
Product Description
SS-6664B is a 1-part low viscosity silicone RTV developed for conformal coating applications. SS-6664B is a clear liquid silicone sealant that offers unprimed adhesion to many metals.
Product features
- Low viscosity
- Neutral cure
- Fast room temperature cure
- Self-leveling liquid RTV
- Adhesion to many metals and plastics
Typical Applications
- Coating electronic assemblies
- Industrial coating and sealing
- Thin section potting and encapsulation
- UNCURED
- Specific Gravity: 0.98
- Uncured Color: Translucent
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 100 cps.
- Tack Free Time: 20 Minutes
- CURED - R.T.
- Cured: 72 Hours @ Room Temperature
- Cured Color: Clear In Thin Films
- Durometer, Shore: A 10
- Dielectric Strength: kv/mm 20
- Dielectric Constant: 3.1
- Dissipation Factor: 0.01
- Volume Resistivity: 15
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.