SS-6002S Heat Cure Conformal Coating - 3 Oz Tube
$14.97
Product Description
SS-6002S is a 1-part silicone RTV developed for conformal coating and seam filling applications. SS-6002S offers unprimed adhesion to many metals and plastics. When cured, SS-6002S results in a very flexible and durable silicone adhesive coating. The elastomer resists weathering, ozone, moisture, UV and high temperatures.
Product features
- Very fast heat cure silicone
- Neutral cure
- Self-leveling liquid RTV
- Adhesion to metals and many plastics
Typical Applications
- Silicone conformal coating
- Industrial sealing
- Thin sections potting & encapsulation
- UNCURED
- Specific Gravity: 0.98
- Uncured Color: Translucent
- Solids: 50% with a non-VOC carrier
- Shelf Life: Sealed containers are guaranteed for 6 months from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 500 cps.
- Tack Free Time: 60 Minutes, <30 seconds @ 150°C
- CURED - R.T.
- Cured: 72 Hours @ Room Temperature
- Durometer, Shore: A 25
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 6 months from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.