SS-6001 Self-Leveling, Neutral Cure Adhesive
Starts at $6.23
Product Description
SS-6001 is a 1-part self leveling silicone RTV developed for coating applications. If you need something for seam filling applications try our SS-6001F clear silicone adhesive. SS-6001 offers unprimed adhesion to many metals and plastics. When cured, this heat resistant silicone adhesive results in a very durable silicone adhesive coating. The high heat silicone elastomer resists weathering, ozone, moisture, UV and high temperature.
Product features
- Fast room temperature cure
- Self-leveling liquid RTV
- Neutral cure
- Adhesion to many metals and plastics
Typical Applications
- Coating assemblies
- Industrial heat resistant sealant
- Thin section potting & encapsulation
- UNCURED
- Specific Gravity: 1.03
- Uncured Color: Translucent, with custom colors available
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 20,000 - 35,000 cps.
- Tack Free Time: 20 Minutes
- CURED - R.T.
- Cured: 72 Hours @ Room Temperature
- Cured Color: Translucent + Custom Colors Upon Request
- Durometer, Shore: A 25
- Dielectric Strength: 20 kv/mm
- Dielectric Constant: 3.1
- Dissipation Factor: 0.01
- Volume Resistivity: 15
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.