SS-598 Heavy Bodied Automotive Silicone RTV Gasket Maker - Ultra Black Offset
Starts at $5.18
Product Description
SS-598 is a fast curing, heavy bodied silicone RTV adhesive rubber. This high temp silicone gasket maker was developed for applications requiring fast development of physical properties and fast unprimed adhesion. SS-598 is a 1-part automotive silicone adhesive that allows handling of the bonded assembly within one hour of application to the substrate. When cured, the black high temp silicone elastomer resists typical automotive fluids and high temperatures.
Product features
- Fast RT cure
- Thixotropic heavy bodied paste
- Excellent unprimed adhesion to most plastics, metal and glass
- Non-corrosive oxime cure
- Rapid onset of adhesion
- High temperature resistance
Typical Applications
- Form in place gaskets
- Adhesive sealant
- Automotive assembly and MRO
- UNCURED
- Specific Gravity: 1.32
- Uncured Color: Black, with custom colors available
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 700,000 cps.
- Tack Free Time: 10 Minutes
- CURED - R.T.
- Cured: 72 Hours @ Room Temperature
- Cured Color: Black
- Durometer, Shore: A 32
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.