SS-5600 2-Part Fast Cure Adhesive
Product Description
SS-5600 is a fast curing adhesive silicone RTV developed for applications requiring fast deep section cures as well as excellent adhesion. SS-5600 is a 2-part, 1:1 mix silicone adhesive that when mixed and applied to the substrate, allows handling within minutes. A dispensing gun is required for the dual syringes on this 2-part adhesive mixture.
Product features
- Fast deep section cure
- Neutral cure
- Excellent unprimed adhesion to most plastics, metal and glass
Typical Applications
- Adhesive encapsulation
- Assembly line adhesive
- Form in place gaskets
- UNCURED
- Specific Gravity: 1.5
- Solids: 98.00%
- Shelf Life: Sealed containers are guaranteed for 6 months from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 260,000 cps.
- Tack Free Time: 10 Minutes
- CURED - R.T.
- Cured: 24 Hours @ Room Temperature
- Cured Color: Black
- Durometer, Shore: A 40
- Dielectric Strength: 21 kv/mm
- Dielectric Constant: 3.2
- Dissipation Factor: 0.02
- Volume Resistivity: 15
Very firm deep section cures are formed in 15 minutes. Ultimate cured properties are found in 24 hours.
Keep this fast-drying silicone adhesive out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 6 months from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.