SS-4010 Very Soft, Peelable, Heat Cure Silicone Foam - 50Ml Dual Syringe

Double click on above image to view full picture

Zoom Out
Zoom In

SS-4010 Very Soft, Peelable, Heat Cure Silicone Foam - 50Ml Dual Syringe

SS-4010    Technical Data Sheet    Safety Data Sheet

Availability: In stock

Price:
$12.55

Product Description

SS-4010 is a soft, heat curing, peelable silicone rubber foam developed for shock and dampening rubber applications requiring a lightweight flexible tough low durometer foam product.

Product Features

  • Fast 1 to 10 minute heat cure
  • 1:1 mix ratio
  • Pourable liquid
  • Tough, peelable and elastomeric

Typical Applications

  • Thermal and radiation resistant rubber parts
  • Silicone foam gasket fabrication
  • Cushioning electronic components

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • UNCURED
  •  
  • Specific Gravity: 1.05
  • Uncured Color: Translucent
  • Solids: 98.00%
  • Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area
  • Viscosity: 1,000 cps.
  • CURED - R.T.
  •  
  • Cured: 1 to 2 Minutes at 150°C
  • Cured Color: Translucent
  • Durometer, Shore: 00 10
  • Coefficient of Thermal Expansion: 20 x 10-5
Platinum catalyzed, addition cure system
The platinum catalyst can be deactivated by exposure to sulfur containing compounds, nitrogen containing compounds, tin metals or compounds, or tin cured RTV's.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturer’s sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.