SS-3006S Low Viscosity, Deep Section Cure Adhesive Sealant
Starts at $25.61
Product Description
SS-3006S is a fast curing, low viscosity adhesive clear RTV silicone. SS-3006S is a 2-part RTV that when mixed, applied and cured, results in a clear RTV silicone adhesive sealant rubber to be formed within 10 minutes. When cured, the transparent silicone adhesive elastomer resists weathering, ozone, moisture, UV and high temperatures. A silicone dispenser is required for the dual syringes.
Product features
- Fast deep section neutral cure
- Low viscosity liquid adhesive
- Excellent adhesion and conformation to plastic, metal and glass parts
- Self priming adhesive sealant
Typical Applications
- Coatings applications
- Encapsulating adhesive
- Deep section cure adhesive
- UNCURED
- Specific Gravity: 1.03
- Uncured Color: Translucent, with custom colors available
- Solids: >99%
- Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
- Viscosity: 25,000 cps.
- Tack Free Time: 120 Minutes at Room Temperature
- CURED - R.T.
- Cured: 24 Hours at Room Temperature, or 10 Minutes at 150°C
- Cured Color: Translucent + Custom Colors Upon Request
- Durometer, Shore: A 30
- Dielectric Strength: 20 kv/mm
- Dielectric Constant: 3.1
- Dissipation Factor: 0.01
- Volume Resistivity: 15
Platinum catalyzed, addition cure system
Avoid contact with tin cured RTVs, sulphur compounds, azides, imides, latex rubber gloves, and amines as cure system can be deactivated.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerメs sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.