SS-2613 2-Part Electrically Conductive Silicone RTV

Double click on above image to view full picture

Zoom Out
Zoom In

SS-2613 2-Part Electrically Conductive Silicone RTV

SS-2613    Technical Data Sheet    Safety Data Sheet
Size Price Qty
2 Oz Kit (1oz-A, 1oz-B)
$397.98
8 Oz Kit (4oz-A, 4oz-B)
$1,500.00
32 Oz Kit (16oz-A, 16oz-B)
$5,500.00
2 Gallon Kit (1 gal-A, 1 gal-B)
$21,000.00
- OR -

Product Description

SS-2613 is an electrically conductive, room temperature curing silicone RTV.

Product Features

  • Very high electrical conductivity
  • RT cure or fast heat cure
  • Suitable for encapsulation and lamination applications
  • 2-part putty
  • 1:1 mix ratio
  • Non-corrosive

Typical Applications

  • Form in place gaskets
  • Electrically conductive sealant
  • EMI/RFI silicone shielding

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • UNCURED
  •  
  • Specific Gravity: 3.06
  • Uncured Color: Silver-Tan
  • Solids: 98.00%
  • Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
  • Viscosity: 500,000 cps
  • Tack Free Time: 15 Minutes at RT
  • CURED - R.T.
  •  
  • Cured: 15 Minutes at 150°C
  • Cured Color: Silver-Tan
  • Durometer, Shore: A 70
  • Volume Resistivity: 0.005
Platinum catalyzed, addition cure
Avoid contact with tin cured RTVs, sulphur compounds, azides, imides, latex rubber gloves, and amines as cure system can be deactivated.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturer’s sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.