SS-25M EMI/RFI Conductive Adhesive

Double click on above image to view full picture

Zoom Out
Zoom In

SS-25M EMI/RFI Conductive Adhesive

SS-25M    Technical Data Sheet    Safety Data Sheet
Size Price Qty
1 Oz Tube
3 Oz Tube
10.3 Oz Cartridge
- OR -

Product Description

SS-25M is an electrically conductive moisture curing silicone RTV. SS-25M is a 1-part self-leveling silicone that when applied to the substrate allows handling of the assembly after 1 hour. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperature. SS-25M is an electrically conductive silicone adhesive that works well in manual and automatic dispensing equipment.

Product Features

  • Room temperature cure
  • Self-leveling
  • Conductive adhesive with high temperature resistance
  • Non-corrosive oxime cure
  • Good for fine needle dispensing

Typical Applications

  • EMI/RFI shielding
  • Electrically conductive sealant
  • Thermally conductive sealant
  • Form in place gaskets

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • Specific Gravity: 2.29
  • Solids: 98.00%
  • Shelf Life: Sealed containers are guaranteed for 6 months from the ship date when stored in a cool dry area below 70°F.
  • Viscosity: 10,000 - 40,000 cps.
  • Tack Free Time: 60 Minutes
  • CURED - R.T.
  • Cured: 24 Hours @ Room Temperature
  • Cured Color: Dark Gray
  • Durometer, Shore: A 65
  • Volume Resistivity: 0.06
Cure speed can be accelerated with increased humidity to very rapid cures, exhibiting surprisingly fast adhesion.
Keep out of the reach of children. Uncured sealant can irritate eyes and skin.
Sealed containers are guaranteed for 6 months from the ship date when stored in a cool dry area below 70°F.
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerï¾’s sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.
  • SS-24
    SS-24 EMI/RFI Conductive Adhesive - CHO-1016 Offset
    Starting at $21.14
  • SS-25
    SS-25 EMI/RFI Conductive Adhesive
    Starting at $23.38
  • SS-26
    SS-26 Electrically Conductive, Silver Filled Adhesive
    Starting at $217.86
  • SS-26S
    SS-26S Electrically Conductive Silicone RTV
    Starting at $239.67
  • SS-27
    SS-27 Silver Coated Aluminum Filled - CHO-1075 Offset
    Starting at $57.56
  • SS-261
    SS-261 1 Part Heat Cure, Electrically Conductive, Silver Filled Adhesive. Must Be Kept Frozen!
    Starting at $303.91