SS-240 High Temperature Thermal Joint Compound

Double click on above image to view full picture

Zoom Out
Zoom In

SS-240 High Temperature Thermal Joint Compound

SS-240    Technical Data Sheet    Safety Data Sheet
Size Price Qty
3 Oz Tube
6 Oz Semco
8 Oz Container
10.3 Oz Cartridge
- OR -

Product Description

SS-240 is a high temperature thermal joint compound developed to fill the gaps between heat sinks and substrates.

Product Features

  • Non-hardening silicone gel
  • High temperature >600F
  • Non-organic thermal joint compound
  • Considered safe in California (solvent free)

Typical Applications

  • Semiconductor assemblies
  • High temperature heat sink compound
  • Electric heating devices

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • Specific Gravity: 2.1
  • Uncured Color: White
  • Solids: 98.00%
  • Shelf Life: Sealed containers are guaranteed for 5 years from the ship date when stored in a cool dry area
  • CURED - R.T.
  • Cured Color: White
  • Dielectric Strength: 225 Volts/mil
  • Thermal Conductivity: 0.735
Product does not harden
Keep thermal paste out of reach of children
Sealed containers are guaranteed for 5 years from the ship date when stored in a cool dry area
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturer’s sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.