SS-151 1 Part Self-Leveling Heat Cure Adhesive Sealant

Double click on above image to view full picture

Zoom Out
Zoom In

SS-151 1 Part Self-Leveling Heat Cure Adhesive Sealant

SS-151    Technical Data Sheet    Safety Data Sheet
Size Price Qty
1 Oz Tube
$6.10
3 Oz Tube
$8.64
16 Oz Container
$27.00
1 Gallon
$122.69
5 Gallons
$570.24
- OR -

Product Description

SS-151 is a 1-part, heat cure silicone developed for conformal coating applications. SS-151 offers unprimed adhesion to metals and many plastics. Heated cures result in a tough and durable silicone conformal coating.

Product Features

  • Low viscosity
  • Neutral addition cure
  • Fast heat cure
  • Self-leveling liquid
  • Fluoresces under UV light to enable coating inspection
  • Adhesion to metals and many plastics

Typical Applications

  • Coating electronic assemblies
  • Industrial coating and sealing
  • Thin section potting & encapsulation

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • UNCURED
  •  
  • Specific Gravity: 0.98
  • Uncured Color: Clear
  • Solids: 100.00%
  • Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
  • Viscosity: 125 cps.
  • Tack Free Time: 15 Minutes at 130°C
  • CURED - R.T.
  •  
  • Cured: 20 Minutes at 130°C
  • Cured Color: Clear
  • Dielectric Strength: 13 kv/mm
  • Dielectric Constant: 2.4
  • Dissipation Factor: 0.01
  • Volume Resistivity: 2.0 X 1014
  • Thermal Conductivity: 0.0005
  • Coefficient of Thermal Expansion: 20 x 10-5
Platinum catalyzed
Avoid contact with tin cured RTVs, sulphur compounds, azides, imides, latex rubber gloves, and amines as cure system can be deactivated.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerï¾’s sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.
  • SS-156
    SS-156 1 Part Self-Leveling Heat Cure Adhesive Sealant - Humiseal 1C55 Offset
    Starting at $6.10
  • SS-4061
    SS-4061 1 Part Heat Cure Conformal Coating/Gel
    Starting at $21.73