Silicone Foams

Foaming silicone products. All 2-part products require a dispensing gun, as they do NOT have a manual handle.
SS-2001 Fire Barrier Silicone RTV Foam - Fire Barrier 2001 Offset
SS-2001 Fire Barrier Silicone RTV Foam - Fire Barrier 2001 Offset
Description: SS-2001 was designed to seal large and/or complex penetrations such as cable bundles, trays, and conduit bundles and multiple pipe runs while sealing out fire, smoke and noxious gases. A dispensing gun is required for the dual syringes.

  • Fills fire stops of fire walls
  • Seals wire pass throughs and heater vents
  • Foam seal gas vent stacks
Starts at $14.36
Technical Data Sheet

Safety Data Sheet
SS-4005 Foaming, Adhesive, Heat Cure Silicone Rubber - Per Pound
SS-4005 Foaming, Adhesive, Heat Cure Silicone Rubber - Per Pound
Description: SS-4005 is a heat curing, foaming, adhesive silicone rubber developed for shock and dampening.

  • Thermal and radiation resistant rubber parts
  • Silicone foam gasket fabrication
  • High and low temperature gaskets
Price: $17.16

Technical Data Sheet

Safety Data Sheet
SS-7 Foaming Silicone Adhesive Sealant
SS-7 Foaming Silicone Adhesive Sealant
Description: SS-7 is a silicone RTV adhesive rubber developed for foam in place applications. SS-7 is a 1-part silicone adhesive that cures at room temperature into a rubber like typical RTV's, but it's unique because it can also foam when exposed to 150C for one minute.

  • Foam in-place gaskets
  • Adhesive sealant
  • Custom industrial seals
Starts at $5.40
Technical Data Sheet

Safety Data Sheet
SS-4010 Very Soft, Peelable, Heat Cure Silicone Foam - 50Ml Dual Syringe
SS-4010 Very Soft, Peelable, Heat Cure Silicone Foam - 50Ml Dual Syringe
Description: SS-4010 is a soft, heat curing, peelable silicone rubber foam developed for shock and dampening rubber applications requiring a lightweight flexible tough low durometer foam product.

  • Thermal and radiation resistant rubber parts
  • Silicone foam gasket fabrication
  • Cushioning electronic components
Price: $12.55

Technical Data Sheet

Safety Data Sheet
SS-2600 Very Soft, Room Temperature Foaming & Curing Silicone Rubber
SS-2600 Very Soft, Room Temperature Foaming & Curing Silicone Rubber
Description: SS-2600 is a soft, room temperature foaming and curing silicone rubber developed for shock and dampening applications. SS-2600 is a 1:1, 2-Part silicone that when mixed, allows rapid foaming and curing of parts. SS-2600 works well in manual and automatic dispensing equipment. A dispensing gun is required for the dual syringes.

  • Thermal and radiation resistant rubber parts
  • Silicone foam gasket fabrication
  • Cushioning electronic components
Starts at $17.00
Technical Data Sheet

Safety Data Sheet