PSA-16 High Tack Heat Cure Silicone Rubber

Double click on above image to view full picture

Zoom Out
Zoom In

PSA-16 High Tack Heat Cure Silicone Rubber

PSA-16    Technical Data Sheet    Safety Data Sheet
Size Price Qty
16 Oz Container
$55.00
1 Gallon
$400.00
5 Gallon
$1,880.00
- OR -

Product Description

PSA-16 is a heat curing, high strength pressure sensitive adhesive developed for silicone rubber applications requiring a tough low durometer product.

Product Features

  • Fast 1 to 10 minutes heat cure
  • 16:1 mix ratio
  • Pourable

Typical Applications

  • Tacky rubber parts
  • Temporary adhesive
  • Prosthetic components

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • UNCURED
  •  
  • Specific Gravity: 1.05
  • Uncured Color: Translucent
  • Solids: 98.00%
  • Shelf Life: Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
  • Viscosity: 50,000 cps.
  • Tack Free Time: 20 Minutes at Room Temperature
  • CURED - R.T.
  •  
  • Cured: 10 Minutes at 150°C
  • Cured Color: Translucent
  • Durometer, Shore: A 6
  • Coefficient of Thermal Expansion: 20 x 10-5
Platinum catalyzed
Avoid contact with tin cured RTVs, sulphur compounds, azides, imides, latex rubber gloves, and amines as cure system can be deactivated.
Sealed containers are guaranteed for 1 year from the ship date when stored in a cool dry area, below 70°F
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as warranty, either expressed or applied. User shall rely on his own information and tests to determine suitability of the product for the intended use, and the user assumes all risk and liability resulting from the use of this product. Manufacturerï¾’s sole responsibility shall be to replace that portion of product of the manufacturer proves to be defective. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer.