PRODUCTS


Encapsulating and Potting

Encapsulating and Potting

The ideal choice for protecting sensitive electronic components from extreme environments. Silicone Solutions electronics potting products can withstand temperatures from -45 to 300C while protecting the components from vibration, moisture, and atmospheric contaminants. Potting silicone and electronic encapsulants by Silicone Solutions consist of both tin and platinum curing systems in a variety of durometers and cure speeds. All 2-part products require a dispensing gun, as they do NOT have a manual handle.
SS-18 2 Part Neutral Cure Self-Leveling Adhesive, 60 Minute Deep Section Cure At Room Temperature
SS-18 2 Part Neutral Cure Self-Leveling Adhesive, 60 Minute Deep Section Cure At Room Temperature
Description: SS-18 is a fast, neutral curing silicone RTV adhesive developed for applications requiring fast deep section cures and excellent adhesion. SS-18 is a 2-part, 1:1 mix ratio silicone adhesive that when mixed and applied to the substrate, allows handling within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the neutral silicone adhesive dual syringes.

  • Adhesive encapsulation
  • Assembly line adhesive
  • Form in place gaskets
Starts at $13.68
Technical Data Sheet

Safety Data Sheet
SS-6139 Blue Repenetrable silicone Gel
SS-6139 Blue Repenetrable silicone Gel
Description: SS-6139 is a room temperature curing blue RTV silicone gel developed for electronic applications requiring a repenetrable, self-sealing silicone gel product. SS-6139 is a 2-part, 1:1 mix ratio silicone that when mixed at room temperature, cures in 12 hours or 15 Minutes when exposed to high enough heat.  A dispensing gun is required for the blue silicone sealant dual syringes.

  • Assemblies requiring inspection with probes
  • Electronic component vibration
  • shock and thermal insulation
  • Potting and encapsulation
  • Dust and moisture protection in a thick barrier coating
  • Transparent dielectric insulation
Starts at $16.49
Technical Data Sheet

Safety Data Sheet
SS-19 2 Part Neutral Cure Thixotropic Adhesive, 60 Minute Deep Section Cure At Room Temperature
SS-19 2 Part Neutral Cure Thixotropic Adhesive, 60 Minute Deep Section Cure At Room Temperature
Description: SS-19 is a fast curing silicone RTV thixotropic adhesive developed for applications requiring fast deep section cures and excellent adhesion. SS-19 is a 2-part, 1:1 mix ratio black silicone adhesive, that when mixed and applied to the substrate, allows handling within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Adhesive encapsulation
  • Assembly line adhesive
  • Form in place gaskets
Starts at $15.33
Technical Data Sheet

Safety Data Sheet
SS-1801 Radiator And Charged Air Cooler Coating
SS-1801 Radiator And Charged Air Cooler Coating
Description: SS-1801 is a fast curing silicone RTV adhesive rubber developed for radiator and coolant leak sealing applications that require fast development of physical properties and excellent adhesion. SS-1801 is a 2-part, 1:1 mix ratio silicone that when mixed and applied to the substrate, allows handling of the coated assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Adhesive sealing of metal parts
  • Assembly line coating
  • Charged air cooler and radiator silicone sealant adhesive coating
Starts at $16.39
Technical Data Sheet

Safety Data Sheet
SS-1801F Fast Cure Radiator And Charged Air Cooler Coating
SS-1801F Fast Cure Radiator And Charged Air Cooler Coating
Description: SS-1801F is a fast curing silicone RTV adhesive rubber developed for radiator leak sealing applications that require fast development of physical properties and excellent adhesion. SS-1801F is a 2-part, 1:1 mix ratio grey silicone sealant that when mixed and applied to the substrate, allows handling of the coated assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Adhesive sealing of metal parts
  • Assembly line coating
  • Radiator and charged air cooler adhesive sealer coating
Starts at $18.04
Technical Data Sheet

Safety Data Sheet
SS-232 2-Part Heat Cure Silicone Rubber
SS-232 2-Part Heat Cure Silicone Rubber
Description: SS-232 is a heat curing, high strength silicone RTV adhesive developed for silicone rubber applications requiring a clear, tough silicone rubber product. SS-232 is a 2-part silicone that when cured, allows handling of the parts within minutes. A dispensing gun is required for the 2-part silicone dual syringes.

  • Silicone rubber parts
  • Bonding glass parts
Starts at $14.47
Technical Data Sheet

Safety Data Sheet
SS-265 2-Part High Durometer, Low Viscosity Heat Cure Silicone Rubber
SS-265 2-Part High Durometer, Low Viscosity Heat Cure Silicone Rubber
Description: SS-265 is a heat curing, high durometer silicone RTV adhesive rubber developed for silicone rubber applications requiring a pourable, high durometer product. A dispensing gun is required for the dual syringes.

  • Silicone rubber parts
  • Silicone gasket fabrication
  • Industrial sealing and potting
Starts at $14.61
Technical Data Sheet

Safety Data Sheet
SS-2321 1-Part Heat Cure Silicone Rubber
SS-2321 1-Part Heat Cure Silicone Rubber
Description: SS-2321 is a high strength, heat curing silicone RTV adhesive rubber developed for applications requiring a tough, translucent silicone rubber product.

  • Clear silicone rubber parts
  • Bonding glass parts
  • Heat cured adhesive
Starts at $22.97
Technical Data Sheet

Safety Data Sheet
SS-2320 2-Part Very Soft Heat Cure Silicone Gel
SS-2320 2-Part Very Soft Heat Cure Silicone Gel
Description: SS-2320 is a heat curing, very soft, 2-part silicone adhesive gel developed for silicone rubber applications requiring a clear, soft rubber product. A dispensing gun is required for the dual syringes.

  • Silicone rubber parts
  • Cushioning parts
  • Shock absorption
Starts at $16.07
Technical Data Sheet

Safety Data Sheet
SS-3003 2 Part Low Durometer Silicone Rubber
SS-3003 2 Part Low Durometer Silicone Rubber
Description: SS-3003 is a heat curing, high strength silicone RTV adhesive developed for silicone rubber applications requiring a tough, low durometer rubber product. SS-3003 is a 2-part silicone that when heat cured, allows handling of the parts within minutes. A dispensing gun is required for the dual syringes.

  • Silicone rubber parts
  • Silicone gasket fabrication
  • Prosthetic components
Starts at $14.53
Technical Data Sheet

Safety Data Sheet
SS-3303 2 Part Low Durometer Silicone Rubber
SS-3303 2 Part Low Durometer Silicone Rubber
Description: SS-3303 is a heat curing, high strength silicone RTV adhesive rubber developed for applications requiring a tough low durometer silicone rubber product. SS-3303 is a 2-Part silicone that when heat cured, allows handling of the parts within minutes. A dispensing gun is required for the dual syringes.

  • Silicone rubber parts
  • Silicone gasket fabrication
  • Prosthetic components
Starts at $19.92
Technical Data Sheet

Safety Data Sheet
SS-3020 2 Part Very Low Durometer Silicone Rubber
SS-3020 2 Part Very Low Durometer Silicone Rubber
Description: SS-3020 is a heat curing, high strength silicone RTV adhesive rubber developed for silicone rubber applications requiring a clear, tough rubber product. SS-3020 is a 2-part silicone rubber that when cured, allows handling of the parts within minutes A dispensing gun is required for the dual syringes.

  • Soft silicone rubber parts
  • Cushions and grips
  • Prosthetic components
Starts at $14.52
Technical Data Sheet

Safety Data Sheet
SS-4061 1 Part Heat Cure Conformal Coating/Gel
SS-4061 1 Part Heat Cure Conformal Coating/Gel
Description:

SS-4061 is a heat curing silicone gel RTV developed for encapsulation and conformal coating applications. SS-4061 is a 1-part silicone that when heated to 150°C, cures in less than 30 minutes, forming a tough silicone rubber insulation.


  • Electronic component vibration
  • shock and thermal insulation
  • Dust and moisture protection
Starts at $23.28
Technical Data Sheet

Safety Data Sheet
SS-4207 2-Part, Dielectric Tough Gel - DC 3-4207 Offset
SS-4207 2-Part, Dielectric Tough Gel - DC 3-4207 Offset
Description: SS-4207 is a fast curing, self-leveling adhesive dielectric silicone RTV. A dispensing gun is required for the dual syringes.

  • Coatings applications
  • Encapsulating and potting
  • Deep section cure translucent green rubber
Starts at $26.78
Technical Data Sheet

Safety Data Sheet
SS-4060 Low Dampening Silicone Gel
SS-4060 Low Dampening Silicone Gel
Description: SS-4060 is a room temperature curing silicone RTV gel. When cured, the silicone damper elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Clear potting or encapsulation of parts
  • Electronic component vibration
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $17.22
Technical Data Sheet

Safety Data Sheet
SS-5060 Medium Dampening Silicone Gel
SS-5060 Medium Dampening Silicone Gel
Description: SS-5060 is a room temperature curing silicone RTV gel that was developed for applications requiring a fast cure clear silicone gel product. When cured, the silicone elastomer gel resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Clear potting or encapsulation of parts
  • Electronic component vibration dampener
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $17.74
Technical Data Sheet

Safety Data Sheet
SS-5061 Very Low Specific Gravity Encapsulant For Hand Held Electronic Components
SS-5061 Very Low Specific Gravity Encapsulant For Hand Held Electronic Components
Description: SS-5061 is a room temperature curing RTV silicone gel developed for applications requiring a low specific gravity product. SS-5061 is a 2-part, 1:1 mix ratio silicone. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Clear potting or encapsulation of parts
  • Electronic component vibration
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $13.21
Technical Data Sheet

Safety Data Sheet
SS-6060 High Dampening Silicone Gel
SS-6060 High Dampening Silicone Gel
Description: SS-6060 is a room temperature curing silicone RTV gel that was developed for applications requiring a fast cure silicone gel product. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Clear potting or encapsulation of parts
  • Electronic component vibration
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $17.22
Technical Data Sheet

Safety Data Sheet
SS-6080 Very High Dampening Clear Gel
SS-6080 Very High Dampening Clear Gel
Description:

SS-6080 is a room temperature curing silicone RTV gel that was developed for applications requiring a fast cure silicone gel product, such as silicone potting gel. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes. If your application requires repenetrating properties, our SS-6139 self-sealing silicone gel would be more desirable.


  • Clear potting or encapsulation of parts
  • Electronic component vibration
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $17.74
Technical Data Sheet

Safety Data Sheet
SS-6139 Clear Repenetrable Silicone Gel
SS-6139 Clear Repenetrable Silicone Gel
Description: SS-6139 is a room temperature curing silicone RTV gel developed for electronic applications requiring a repenetrable, self-sealing silicone gel product. SS-6139 is a 2-part, 1:1 mix ratio silicone that when mixed at room temperature, cures in 12 hours or 15 Minutes when exposed to high enough heat. A dispensing gun is required for the dual syringes.

  • Assemblies requiring inspection with probes
  • Electronic component vibration
  • shock and thermal insulation
  • Potting and encapsulation
  • Dust and moisture protection in a thick barrier coating
  • Transparent dielectric insulation silicone
Starts at $16.49
Technical Data Sheet

Safety Data Sheet
SS-5600 2-Part Fast Cure Adhesive
SS-5600 2-Part Fast Cure Adhesive
Description: SS-5600 is a fast curing adhesive silicone RTV developed for applications requiring fast deep section cures as well as excellent adhesion. SS-5600 is a 2-part, 1:1 mix silicone adhesive that when mixed and applied to the substrate, allows handling within minutes. A dispensing gun is required for the dual syringes.

  • Adhesive encapsulation
  • Assembly line adhesive
  • Form in place gaskets
Starts at $16.22
Technical Data Sheet

Safety Data Sheet
SS-6010 Gels, Low Duro Silicone Rubber
SS-6010 Gels, Low Duro Silicone Rubber
Description: SS-6010 is a heat curing low durometer silicone RTV gel. It was developed for applications requiring a very soft silicone gel product. A dispensing gun is required for the dual syringes.

  • Clear potting or encapsulation of parts
  • Electronic component vibration insulation
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $17.22
Technical Data Sheet

Safety Data Sheet
SS-8112 Fast Cure Liquid Silicone Rubber - Per Pound - GE RTV 8112 Offset
SS-8112 Fast Cure Liquid Silicone Rubber - Per Pound - GE RTV 8112 Offset
Description: SS-8112 is a fast curing, RTV liquid silicone rubber developed for potting and encapsulation applications.

  • Electronic component encapsulation
  • Electrical potting
  • Thermal insulation
  • Vibration insulation
  • Moisture insulation
Price: $24.06

Technical Data Sheet

Safety Data Sheet
SS-8113 2 Part Pourable Silicone Rubber For Potting And Encapsulation - Per Pound
SS-8113 2 Part Pourable Silicone Rubber For Potting And Encapsulation - Per Pound
Description: SS-8113 is a fast curing, pourable silicone RTV rubber developed for potting and encapsulation applications. SS-8113 is a 2-part, variable mix ratio silicone potting, that when mixed, allows handling of the assembly within 45 to 120 minutes. A pound consists of a 16 oz container of base, and a 2 oz container of catalyst.

  • Electronic component encapsulation
  • Electrical potting
  • Thermal insulation
  • Vibration and moisture insulation
Price: $23.82

Technical Data Sheet

Safety Data Sheet