PRODUCTS


2-Part Products

2-Part Products

2-Part silicone is typically used to seal or bond substrates together as an assembly. Silicone Solutions offers a multitude of products in this category to give our customers the widest selection possible. All silicone rubber sealant products require a dispensing gun, as they do NOT have a manual handle.
SS-232 2-Part Heat Cure Silicone Rubber
SS-232 2-Part Heat Cure Silicone Rubber
Description: SS-232 is a heat curing, high strength silicone RTV adhesive developed for silicone rubber applications requiring a clear, tough silicone rubber product. SS-232 is a 2-part silicone that when cured, allows handling of the parts within minutes. A dispensing gun is required for the 2-part silicone dual syringes.

  • Silicone rubber parts
  • Bonding glass parts
Starts at $14.47
Technical Data Sheet

Safety Data Sheet
SS-3003 2 Part Low Durometer Silicone Rubber
SS-3003 2 Part Low Durometer Silicone Rubber
Description: SS-3003 is a heat curing, high strength silicone RTV adhesive developed for silicone rubber applications requiring a tough, low durometer rubber product. SS-3003 is a 2-part silicone that when heat cured, allows handling of the parts within minutes. A dispensing gun is required for the dual syringes.

  • Silicone rubber parts
  • Silicone gasket fabrication
  • Prosthetic components
Starts at $14.53
Technical Data Sheet

Safety Data Sheet
SS-18 2 Part Neutral Cure Self-Leveling Adhesive, 60 Minute Deep Section Cure At Room Temperature
SS-18 2 Part Neutral Cure Self-Leveling Adhesive, 60 Minute Deep Section Cure At Room Temperature
Description: SS-18 is a fast, neutral curing silicone RTV adhesive developed for applications requiring fast deep section cures and excellent adhesion. SS-18 is a 2-part, 1:1 mix ratio silicone adhesive that when mixed and applied to the substrate, allows handling within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the neutral silicone adhesive dual syringes.

  • Adhesive encapsulation
  • Assembly line adhesive
  • Form in place gaskets
Starts at $13.68
Technical Data Sheet

Safety Data Sheet
SS-222 2-Part Low Viscosity Dip Coating Silicone Rubber
SS-222 2-Part Low Viscosity Dip Coating Silicone Rubber
Description:

SS-222 is a heat curing, silicone RTV adhesive rubber developed for coating applications requiring a low viscosity silicone dip coating product. A dispensing gun is required for the silicone coating dual syringes.


  • Silicone rubber coated handles
  • Silicone gasket fabrication
  • Coating glass bakeware
Starts at $17.14
Technical Data Sheet

Safety Data Sheet
SS-4207 2-Part, Dielectric Tough Gel - DC 3-4207 Offset
SS-4207 2-Part, Dielectric Tough Gel - DC 3-4207 Offset
Description: SS-4207 is a fast curing, self-leveling adhesive dielectric silicone RTV. A dispensing gun is required for the dual syringes.

  • Coatings applications
  • Encapsulating and potting
  • Deep section cure translucent green rubber
Starts at $26.78
Technical Data Sheet

Safety Data Sheet
SS-6010 Gels, Low Duro Silicone Rubber
SS-6010 Gels, Low Duro Silicone Rubber
Description: SS-6010 is a heat curing low durometer silicone RTV gel. It was developed for applications requiring a very soft silicone gel product. A dispensing gun is required for the dual syringes.

  • Clear potting or encapsulation of parts
  • Electronic component vibration insulation
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $17.22
Technical Data Sheet

Safety Data Sheet
SS-265 2-Part High Durometer, Low Viscosity Heat Cure Silicone Rubber
SS-265 2-Part High Durometer, Low Viscosity Heat Cure Silicone Rubber
Description: SS-265 is a heat curing, high durometer silicone RTV adhesive rubber developed for silicone rubber applications requiring a pourable, high durometer product. A dispensing gun is required for the low viscosity silicone rubber dual syringes.

  • Silicone rubber parts
  • Silicone gasket fabrication
  • Industrial sealing and potting
Starts at $14.61
Technical Data Sheet

Safety Data Sheet
SS-3303 2 Part Low Durometer Silicone Rubber
SS-3303 2 Part Low Durometer Silicone Rubber
Description: SS-3303 is a heat curing, high strength silicone RTV adhesive rubber developed for applications requiring a tough low durometer silicone rubber product. SS-3303 is a 2-Part silicone that when heat cured, allows handling of the parts within minutes. A dispensing gun is required for the dual syringes.

  • Silicone rubber parts
  • Silicone gasket fabrication
  • Prosthetic components
Starts at $19.92
Technical Data Sheet

Safety Data Sheet
SS-2005 Thermally Conductive Gap Filler
SS-2005 Thermally Conductive Gap Filler
Description: SS-2005 is a high performance thermally conductive liquid gap filling material. It is formulated to develop a soft, form in place elastomer, ideal for coupling hot PC board components to heat sinks. This conductive silicone elastomer is supplied as a two part, 1:1 mix ratio silicone that when mixed and exposed to 150C, results in a cured elastomer in 5 minutes.

  • Electronic component thermal dissipation
  • Coupling electronic components
  • Form in place heat sink
Starts at $26.02
Technical Data Sheet

Safety Data Sheet
TS-33D Versine 2-Part Composite
TS-33D Versine 2-Part Composite
Description: TS-33D is a revolutionary new engineering composite material. It's a 2-part, 1:1 mix, rubber-like product that is unique, as it machines like a metal, molds like a thermoset plastics and flexes like a rubber. TS-33D is a very high temperature resistant rubber composite material, >650F and withstands 22,000 PSI compression and bounces back. It's tough, abrasion resistant, and has low surface coefficient of friction.

  • Military antennae
  • Seals
  • Gaskets
Starts at $18.91
Technical Data Sheet

Safety Data Sheet
SS-3006T-LV Low Volatile, Thixotropic, Deep Section Cure Adhesive Sealant
SS-3006T-LV Low Volatile, Thixotropic, Deep Section Cure Adhesive Sealant
Description: SS-3006T is a low volatile, fast curing, thixotropic adhesive silicone RTV. SS-3006T is a 2-part RTV that when mixed, results in an adhesive silicone sealant rubber that is formed within 10 minutes. A dispensing gun is required for the dual syringes.

  • Large bonding applications
  • Fixturing adhesive
  • Deep section cure adhesive
Starts at $16.92
Technical Data Sheet

Safety Data Sheet
SS-6139 Blue Repenetrable silicone Gel
SS-6139 Blue Repenetrable silicone Gel
Description: SS-6139 is a room temperature curing blue RTV silicone gel developed for electronic applications requiring a repenetrable, self-sealing silicone gel product. SS-6139 is a 2-part, 1:1 mix ratio silicone that when mixed at room temperature, cures in 12 hours or 15 Minutes when exposed to high enough heat.  A dispensing gun is required for the blue silicone sealant dual syringes.

  • Assemblies requiring inspection with probes
  • Electronic component vibration
  • shock and thermal insulation
  • Potting and encapsulation
  • Dust and moisture protection in a thick barrier coating
  • Transparent dielectric insulation
Starts at $16.49
Technical Data Sheet

Safety Data Sheet
SS-19 2 Part Neutral Cure Thixotropic Adhesive, 60 Minute Deep Section Cure At Room Temperature
SS-19 2 Part Neutral Cure Thixotropic Adhesive, 60 Minute Deep Section Cure At Room Temperature
Description: SS-19 is a fast curing silicone RTV thixotropic adhesive developed for applications requiring fast deep section cures and excellent adhesion. SS-19 is a 2-part, 1:1 mix ratio black silicone adhesive, that when mixed and applied to the substrate, allows handling within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Adhesive encapsulation
  • Assembly line adhesive
  • Form in place gaskets
Starts at $15.33
Technical Data Sheet

Safety Data Sheet
PSA-16 High Tack Heat Cure Silicone Rubber
PSA-16 High Tack Heat Cure Silicone Rubber
Description: PSA-16 is a heat curing, high strength pressure sensitive adhesive developed for silicone rubber applications requiring a tough low durometer product.

  • Tacky rubber parts
  • Temporary adhesive
  • Prosthetic components
Starts at $58.92
Technical Data Sheet

Safety Data Sheet
SS-70 High Temperature Heat Cure Silicone Rubber - Per Pound
SS-70 High Temperature Heat Cure Silicone Rubber - Per Pound
Description: SS-70 is a high temperature resistant, heat curing silicone RTV molding rubber

  • Silicone rubber parts
  • Gaskets
  • High temperature rubber assemblies
Price: $55.70

Technical Data Sheet

Safety Data Sheet
SS-1000 2 Part Vibration/Shock Dampening Coating
SS-1000 2 Part Vibration/Shock Dampening Coating
Description: SS-1000 is a fast curing silicone rubber coating developed for shock dampening and vibration isolation applications. SS-1000 is a 2-part silicone vibration dampener that when cured, allows handling of the parts within minutes. A dispensing gun is required for the clear rubber coating's dual syringes.

  • Vibration isolation
  • Severe impact cushioning
  • Dampening of severe shock
Starts at $14.97
Technical Data Sheet

Safety Data Sheet
SS-1801 Radiator And Charged Air Cooler Coating
SS-1801 Radiator And Charged Air Cooler Coating
Description: SS-1801 is a fast curing silicone RTV adhesive rubber developed for radiator and coolant leak sealing applications that require fast development of physical properties and excellent adhesion. SS-1801 is a 2-part, 1:1 mix ratio silicone radiator sealer that when mixed and applied to the substrate, allows handling of the coated assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Adhesive sealing of metal parts
  • Assembly line coating
  • Charged air cooler and radiator silicone sealant adhesive coating
Starts at $16.39
Technical Data Sheet

Safety Data Sheet
SS-1801F Fast Cure Radiator And Charged Air Cooler Coating
SS-1801F Fast Cure Radiator And Charged Air Cooler Coating
Description: SS-1801F is a fast curing silicone RTV adhesive rubber developed for radiator leak sealing applications that require fast development of physical properties and excellent adhesion. SS-1801F is a 2-part, 1:1 mix ratio grey silicone sealant that when mixed and applied to the substrate, allows handling of the coated assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Adhesive sealing of metal parts
  • Assembly line coating
  • Radiator and charged air cooler adhesive sealer coating
Starts at $18.04
Technical Data Sheet

Safety Data Sheet
SS-2001 Fire Barrier Silicone RTV Foam - Fire Barrier 2001 Offset
SS-2001 Fire Barrier Silicone RTV Foam - Fire Barrier 2001 Offset
Description:

The SS-2001 RTV foam sealant was designed to seal large and/or complex penetrations such as cable bundles, trays, and conduit bundles and multiple pipe runs while sealing out fire, smoke and noxious gases. A dispensing gun is required for the dual syringes of this fire barrier foam. If you need a fire resistant coating that does not require a dispensing gun, view our SS-3002 spray-on silicone.


  • Fills fire stops of fire walls
  • Seals wire pass throughs and heater vents
  • Foam seal gas vent stacks
Starts at $15.38
Technical Data Sheet

Safety Data Sheet
SS-2007 Low Viscosity Gap Filler Thermally Conductive Silicone Rubber
SS-2007 Low Viscosity Gap Filler Thermally Conductive Silicone Rubber
Description: SS-2007 is a low viscosity, self-leveling high performance thermally conductive liquid silicone gap filling material. A dispensing gun is required for the dual syringes.

  • Electronic component thermal dissipation
  • Coupling electronic components
  • Form in place heat sink
Starts at $25.96
Technical Data Sheet

Safety Data Sheet
SS-2320 2-Part Very Soft Heat Cure Silicone Gel
SS-2320 2-Part Very Soft Heat Cure Silicone Gel
Description: SS-2320 is a heat curing, very soft, 2-part silicone adhesive gel developed for silicone rubber applications requiring a clear, soft rubber product. A dispensing gun is required for the dual syringes.

  • Silicone rubber parts
  • Cushioning parts
  • Shock absorption
Starts at $16.07
Technical Data Sheet

Safety Data Sheet
SS-3006S Self-Leveling, Deep Section Cure Adhesive Sealant
SS-3006S Self-Leveling, Deep Section Cure Adhesive Sealant
Description: SS-3006S is a fast curing, self-leveling adhesive silicone RTV. SS-3006S is a 2-part RTV that when mixed, applied and cured, results in a clear RTV silicone adhesive sealant rubber to be formed within 10 minutes. When cured, the transparent silicone adhesive elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Coatings applications
  • Encapsulating adhesive
  • Deep section cure adhesive
Starts at $14.53
Technical Data Sheet

Safety Data Sheet
SS-3006SF Fast Deep Section Cure, Self-Leveling Adhesive Sealant
SS-3006SF Fast Deep Section Cure, Self-Leveling Adhesive Sealant
Description: SS-3006SF is a fast curing, self-leveling adhesive sealant silicone RTV. SS-3006SF is a 2-part RTV that when mixed, applied and cured, results in a silicone adhesive sealant rubber to be formed within 10 minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Coatings applications
  • Encapsulating adhesive
  • Deep section cure adhesive
Starts at $15.97
Technical Data Sheet

Safety Data Sheet
SS-3006T Thixotropic, Deep Section Cure Adhesive
SS-3006T Thixotropic, Deep Section Cure Adhesive
Description: SS-3006T is a fast curing, thixotropic adhesive silicone RTV. SS-3006T is a 2-part RTV that when mixed, results in a silicone adhesive sealant rubber that is formed within 10 minutes. A dispensing gun is required for the dual syringes.

  • Large bonding applications
  • Fixturing adhesive
  • Deep section cure adhesive
Starts at $15.38
Technical Data Sheet

Safety Data Sheet
SS-3006TF Thixotropic, Fast Deep Section Cure Adhesive Sealant
SS-3006TF Thixotropic, Fast Deep Section Cure Adhesive Sealant
Description: SS-3006TF is a fast curing, thixotropic adhesive silicone RTV. SS-3006TF is a 2-part RTV that when mixed, applied and cured, results in a clear RTV silicone sealant rubber to be formed within 10 minutes. A dispensing gun is required for the dual syringes.

  • Large bonding applications
  • Fixturing adhesive
  • Deep section cure adhesive
Starts at $16.47
Technical Data Sheet

Safety Data Sheet
SS-3007 Fast Deep Section Cure Adhesive Sealant
SS-3007 Fast Deep Section Cure Adhesive Sealant
Description: SS-3007 is a fast curing silicone RTV adhesive rubber developed for bonding applications requiring fast development of physical properties. SS-3007 is a 2-part black silicone sealant that when applied to the substrate and cured, allows handling of the bonded assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Component bonding
  • Gasket fabrication
Starts at $19.06
Technical Data Sheet

Safety Data Sheet
SS-3007VF Very Fast Deep Section Cure Adhesive Sealant
SS-3007VF Very Fast Deep Section Cure Adhesive Sealant
Description: SS-3007VF is a fast curing silicone RTV adhesive rubber developed for bonding applications requiring fast development of physical properties. SS-3007VF is a 2-part silicone adhesive that when applied to the substrate and cured, allows handling of the bonded assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the high temperature adhesive sealant's dual syringes.

  • Component bonding
  • Gasket fabrication
Starts at $20.98
Technical Data Sheet

Safety Data Sheet
SS-3007EF Extremely Fast Deep Section Cure Adhesive Sealant
SS-3007EF Extremely Fast Deep Section Cure Adhesive Sealant
Description: SS-3007EF is an extremely fast curing silicone RTV adhesive rubber sealant developed for bonding applications requiring fast development of physical properties. SS-3007EF is a 2-part silicone that when applied to the substrate and cured, allows handling of the bonded assembly within minutes. When cured, the RTV black silicone sealant elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Component bonding
  • Gasket fabrication
Starts at $23.08
Technical Data Sheet

Safety Data Sheet
SS-4060 Low Dampening Silicone Gel
SS-4060 Low Dampening Silicone Gel
Description: SS-4060 is a room temperature curing silicone RTV gel. When cured, the silicone damper elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Clear potting or encapsulation of parts
  • Electronic component vibration
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $17.22
Technical Data Sheet

Safety Data Sheet
SS-3008 2-Part Thixotropic Adhesive Sealant Silicone RTV
SS-3008 2-Part Thixotropic Adhesive Sealant Silicone RTV
Description: SS-3008 is a fast curing, thixotropic adhesive silicone RTV. SS-3008 is a 2-part RTV sealant that when mixed, applied and cured, results in a silicone adhesive sealant rubber which is formed within 10 minutes. A dispensing gun is required for the silicone rubber adhesive sealant dual syringes.

  • Large bonding applications
  • Fixturing adhesive
  • Deep section cure adhesive
Starts at $15.97
Technical Data Sheet

Safety Data Sheet
SS-5060 Medium Dampening Silicone Gel
SS-5060 Medium Dampening Silicone Gel
Description: SS-5060 is a room temperature curing silicone RTV gel that was developed for applications requiring a fast cure clear silicone gel product. When cured, the silicone elastomer gel resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Clear potting or encapsulation of parts
  • Electronic component vibration dampener
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $17.74
Technical Data Sheet

Safety Data Sheet
SS-5061 Very Low Specific Gravity Encapsulant For Hand Held Electronic Components
SS-5061 Very Low Specific Gravity Encapsulant For Hand Held Electronic Components
Description: SS-5061 is a room temperature curing RTV silicone gel developed for applications requiring a low specific gravity product. SS-5061 is a 2-part, 1:1 mix ratio silicone. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the dual syringes.

  • Clear potting or encapsulation of parts
  • Electronic component vibration
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $13.21
Technical Data Sheet

Safety Data Sheet
SS-5600 2-Part Fast Cure Adhesive
SS-5600 2-Part Fast Cure Adhesive
Description: SS-5600 is a fast curing adhesive silicone RTV developed for applications requiring fast deep section cures as well as excellent adhesion. SS-5600 is a 2-part, 1:1 mix silicone adhesive that when mixed and applied to the substrate, allows handling within minutes. A dispensing gun is required for the dual syringes.

  • Adhesive encapsulation
  • Assembly line adhesive
  • Form in place gaskets
Starts at $16.22
Technical Data Sheet

Safety Data Sheet
SS-6060 High Dampening Silicone Gel
SS-6060 High Dampening Silicone Gel
Description: SS-6060 is a room temperature curing silicone RTV gel that was developed for applications requiring a fast cure silicone gel product. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. A dispensing gun is required for the waterproof silicone sealant's dual syringes.

  • Clear potting or encapsulation of parts
  • Electronic component vibration
  • shock and thermal insulation
  • Dust and moisture protection
  • Dielectric insulation
Starts at $17.22
Technical Data Sheet

Safety Data Sheet
SS-6139 Clear Repenetrable Silicone Gel
SS-6139 Clear Repenetrable Silicone Gel
Description: SS-6139 is a room temperature curing silicone RTV gel developed for electronic applications requiring a repenetrable, self-sealing silicone gel product. SS-6139 is a 2-part, 1:1 mix ratio silicone that when mixed at room temperature, cures in 12 hours or 15 Minutes when exposed to high enough heat. A dispensing gun is required for the dual syringes.

  • Assemblies requiring inspection with probes
  • Electronic component vibration
  • shock and thermal insulation
  • Potting and encapsulation
  • Dust and moisture protection in a thick barrier coating
  • Transparent dielectric insulation silicone
Starts at $16.49
Technical Data Sheet

Safety Data Sheet
SS-8112 Fast Cure Liquid Silicone Rubber - Per Pound - GE RTV 8112 Offset
SS-8112 Fast Cure Liquid Silicone Rubber - Per Pound - GE RTV 8112 Offset
Description: SS-8112 is a fast curing, RTV liquid silicone rubber developed for potting and encapsulation applications.

  • Electronic component encapsulation
  • Electrical potting
  • Thermal insulation
  • Vibration insulation
  • Moisture insulation
Price: $24.06

Technical Data Sheet

Safety Data Sheet
SS-8113 2 Part Pourable Silicone Rubber For Potting And Encapsulation - Per Pound
SS-8113 2 Part Pourable Silicone Rubber For Potting And Encapsulation - Per Pound
Description: SS-8113 is a fast curing, pourable silicone RTV rubber developed for potting and encapsulation applications. SS-8113 is a 2-part, variable mix ratio silicone potting, that when mixed, allows handling of the assembly within 45 to 120 minutes. A pound consists of a 16 oz container of base, and a 2 oz container of catalyst.

  • Electronic component encapsulation
  • Electrical potting
  • Thermal insulation
  • Vibration and moisture insulation
Price: $23.82

Technical Data Sheet

Safety Data Sheet