PRODUCTS


1-Part Products

1-Part Products

Typically used to seal or bond substrates together as an assembly. Silicone Solutions offers a multitude of products in this category to give our customers the widest selection possible.
SS-7 Foaming Silicone Adhesive Sealant
SS-7 Foaming Silicone Adhesive Sealant
Description: SS-7 is a silicone RTV adhesive rubber developed for foam in place applications. SS-7 is a 1-part silicone adhesive that cures at room temperature into a rubber like typical RTV's, but it's unique because it can also foam when exposed to 150C for one minute.

  • Foam in-place gaskets
  • Adhesive sealant
  • Custom industrial seals
Starts at $5.40
Technical Data Sheet

Safety Data Sheet
SS-24 EMI/RFI Conductive Adhesive - CHO-1016 Offset
SS-24 EMI/RFI Conductive Adhesive - CHO-1016 Offset
Description: SS-24 is an electrically conductive, moisture curing silicone RTV. SS-24 is a 1-part silicone, that when applied to the substrate, allows handling of the assembly within an hour. SS-24 works well in manual and automatic dispensing equipment.

  • Form in place gaskets
  • Electrically conductive sealant
  • EMI/RFI shielding
Starts at $19.54
Technical Data Sheet

Safety Data Sheet
SS-24-25 EMI/RFI Conductive Adhesive
SS-24-25 EMI/RFI Conductive Adhesive
Description: SS-24-25 is an electrically conductive, moisture curing silicone RTV. SS-24-25 is a 1-part silicone, that when applied to the substrate, allows handling of the assembly within an hour. SS-24-25 works well in manual and automatic dispensing equipment.

  • Form in place gaskets
  • Electrically conductive sealant
  • EMI/RFI shielding
Starts at $17.59
Technical Data Sheet

Safety Data Sheet
SS-24-50 EMI/RFI Conductive Adhesive
SS-24-50 EMI/RFI Conductive Adhesive
Description: SS-24-50 is an electrically conductive, moisture curing silicone RTV. SS-24-50 is a 1-part silicone, that when applied to the substrate, allows handling of the assembly within an hour. SS-24-50 works well in manual and automatic dispensing equipment.

  • Form in place gaskets
  • Electrically conductive sealant
  • EMI/RFI shielding
Starts at $17.06
Technical Data Sheet

Safety Data Sheet
SS-567 Foul-Off Municipal Marine Anti-Foulant Coating
SS-567 Foul-Off Municipal Marine Anti-Foulant Coating
Description: SS-567 is a clear rubber anti-fouling coating based on polydimethylsiloxane technology. It offers anti-fouling to: locks, buoys, piers, docks, waterways, filtration systems, dams, and many others. It’s too slippery to attach to.

  • Water intake valves at dams
  • Water filtration systems
  • Ship hull anti-fouling
  • Propeller anti-fouling
  • Hydroelectric power stations
  • Water supply equipment and piping
Starts at $125.00
Technical Data Sheet

Safety Data Sheet
SS-5000A Silicone Slip Clean Hull and Anti-Fouling Coating
SS-5000A Silicone Slip Clean Hull and Anti-Fouling Coating
Description: SS-5000A is a clear rubber coating based on polydimethylsiloxane technology. It offers a non-staining effect to boat hulls, anti-fouling to the hull and running gear while offering enhanced cruising range and ship speed through reduced friction of the hull through the water.

  • Ship hull anti-fouling
  • Propeller anti-fouling
  • Ship friction reducer
  • Essential in warm waters
Starts at $70.00
Technical Data Sheet

Safety Data Sheet
SS-34 Ship-Slide Professional Marine Anti-Foulant & Rust Resistant Coating
SS-34 Ship-Slide Professional Marine Anti-Foulant & Rust Resistant Coating
Description: SS-34 is an anti-foulant and rust resistant silicone coating. It is an easy to use 1:1 mix, 2-part liquid that when mixed, applied and cured, results in a silicone rubber coating that repels bio-fouling. Being too slippery to attach to, barnacles, zebra mussels and sea-life slide off with the least current. In ships, it keeps hull and running gear clean while offering enhanced cruising range via reduced buildup on the hull when moving through the water.

  • All fresh and saltwater shipping
  • MRO operations on ships
  • Docks - piers - tugs - port operations
Starts at $90.00
Technical Data Sheet

Safety Data Sheet
SS-67C High Elongation Silicone Parts Bonder
SS-67C High Elongation Silicone Parts Bonder
Description: SS-67C is a fast curing, high strength, 1-part acetoxy silicone RTV adhesive rubber developed for silicone rubber bonding. SS-67C is designed for situations requiring fast development of physical properties. SS-67C is intended for applications demanding very high elongation (over 1000%). When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Silicone rubber bonding and splicing
  • Silicone component fabrication
  • Prosthetic assembly and repair
Starts at $11.19
Technical Data Sheet

Safety Data Sheet
SS-25 EMI/RFI Conductive Adhesive
SS-25 EMI/RFI Conductive Adhesive
Description: SS-25 is an electrically conductive, moisture curing silicone RTV. SS-25 is a 1-part silicone that when applied to the substrate, allows handling of the assembly after 1 hour. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • EMI/RFI shielding
  • Electrically conductive sealant
  • Thermally conductive sealant
  • Form in place gaskets
Starts at $22.06
Technical Data Sheet

Safety Data Sheet
SS-25S Flexible EMI/RFI Conductive Adhesive
SS-25S Flexible EMI/RFI Conductive Adhesive
Description: SS-25S is an electrically conductive, moisture curing silicone RTV. SS-25S is a 1-part silicone that when applied to the substrate, is flexible and allows handling of the assembly after 1 hour. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Flexible EMI/RFI shielding
  • Flexible electrically conductive sealant
  • Thermally conductive sealant
  • Form in place gaskets
Starts at $24.27
Technical Data Sheet

Safety Data Sheet
SS-26 Electrically Conductive, Silver Filled Adhesive - Tecknit 0002 Offset
SS-26 Electrically Conductive, Silver Filled Adhesive - Tecknit 0002 Offset
Description: SS-26 is an electrically conductive, moisture curing silicone RTV. SS-26 is a 1-part silicone that when applied to the substrate allows handling of the assembly within an hour. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Form in place gaskets
  • Electrically conductive sealant
  • EMI/RFI silicone shielding
Starts at $201.45
Technical Data Sheet

Safety Data Sheet
SS-27 Silver Coated Aluminum Filled - CHO-1075 Offset
SS-27 Silver Coated Aluminum Filled - CHO-1075 Offset
Description: SS-27 is an electrically conductive, moisture curing silicone RTV. SS-27 is a 1-part silicone that when applied to the substrate allows handling of the assembly within an hour. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures

  • Form in place gaskets
  • Electrically conductive sealant
  • EMI/RFI silicone shielding
Starts at $54.24
Technical Data Sheet

Safety Data Sheet
SS-27S Flexible Silver Coated Aluminum Filled Conductive Silicone
SS-27S Flexible Silver Coated Aluminum Filled Conductive Silicone
Description: SS-27S is an electrically conductive, moisture curing silicone RTV. SS-27S is a 1-part silicone that when applied to the substrate, is flexible and allows handling of the assembly within 1 hour.

  • Form in place gaskets
  • Electrically conductive sealant
  • EMI/RFI silicone shielding
Starts at $59.53
Technical Data Sheet

Safety Data Sheet
SS-30 High Temperature, Oil Resistant Adhesive Sealant - 77 Ultra Blue Offset
SS-30 High Temperature, Oil Resistant Adhesive Sealant - 77 Ultra Blue Offset
Description: SS-30 is a fast curing silicone RTV adhesive rubber developed for automotive gasketing applications requiring fast development of physical properties and fast unprimed adhesion. When cured, the elatomer resists weathering, ozone, moisture, UV and high temperatures. SS-30 is also designed for superior oil resistance.

  • Aftermarket adhesive sealant
  • Automotive form in place gaskets
  • Situations where the gasket flange is contaminated with oil
Starts at $5.40
Technical Data Sheet

Safety Data Sheet
SS-35 Thermally Conductive Adhesive
SS-35 Thermally Conductive Adhesive
Description: SS-35 is a thermally conductive silicone RTV adhesive rubber developed for heat sink applications. SS-35 is a 1-part silicone that when applied to the substrate enables adhesion to parts and heat transfer of the bonded assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • PC board heat sink
  • Electronic component heat transfer
  • Adhesive sealing of components
  • Part fixturing with heat dissipation capability
  • Power unit adhesive
Starts at $306.72
Technical Data Sheet

Safety Data Sheet
SS-38 Masking RTV, Peelable Cure In Place Rubber For Plating And Coating
SS-38 Masking RTV, Peelable Cure In Place Rubber For Plating And Coating
Description: SS-38 is a peelable silicone RTV developed for applications requiring a form fitting temporary protective cover. SS-38 is a 1-part silicone adhesive that when applied to the substrate, cures to a pliable, removable, protective covering within a day. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. ***Product does not peel well off of some glass products***

  • Peelable protective covering for sandblasting
  • Metal masking for plating operations
  • Temporary weatherstripping
Starts at $7.97
Technical Data Sheet

Safety Data Sheet
SS-380 Peelable, Self-Leveling Silicone RTV Coating
SS-380 Peelable, Self-Leveling Silicone RTV Coating
Description: SS-380 is a peelable silicone RTV coating developed for applications requiring a form fitting temporary protective cover. SS-380 is a 1-part silicone that when applied to the substrate, cures to a pliable, removable, protective covering within 1 day. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. SS-380 works well in automatic and manual dispensing equipment.

  • Sandblasting
  • Metal masking for plating operations
Starts at $7.97
Technical Data Sheet

Safety Data Sheet
AA-67A - RTV157 Offset
AA-67A - RTV157 Offset
Description: AA-67A is a fast curing, high strength, 1-part acetoxy silicone RTV adhesive rubber product engineered for applications requiring fast development of physical properties and excellent adhesion. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Starts at $9.23
Technical Data Sheet

Safety Data Sheet
SS-67A Fast Cure, High Strength Acetoxy Adhesive Sealant
SS-67A Fast Cure, High Strength Acetoxy Adhesive Sealant
Description: SS-67A is a fast curing, high strength, 1-part acetoxy silicone RTV adhesive rubber product engineered for applications requiring fast development of physical properties and excellent adhesion. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Starts at $8.39
Technical Data Sheet

Safety Data Sheet
SS-67B Fast Cure, Silicone To Silicone Bonder
SS-67B Fast Cure, Silicone To Silicone Bonder
Description: SS-67B is a fast curing, high strength, 1-part acetoxy silicone RTV adhesive developed for silicone rubber bonding requiring fast development of physical properties. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Silicone rubber bonding and splicing
  • Silicone component fabrication
  • Prosthetic assembly and repair
Starts at $11.19
Technical Data Sheet

Safety Data Sheet
SS-67E Low Modulus, High Elongation RTV
SS-67E Low Modulus, High Elongation RTV
Description: SS-67E is a fast curing, high strength, 1-part acetoxy silicone RTV adhesive rubber developed for silicone rubber bonding. SS-67E is designed for situations requiring fast development of physical properties. SS-67E is intended for applications demanding very high elongation (over 1000%). When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Silicone rubber bonding and splicing
  • Silicone component fabrication
  • Prosthetic assembly and repair
Starts at $11.19
Technical Data Sheet

Safety Data Sheet
AA-69 - RTV159 Offset
AA-69 - RTV159 Offset
Description: AA-69 is a high strength, high temperature silicone RTV engineered for applications requiring fast development of physical properties and excellent adhesion. AA-69 offers the highest temperature resistance of any acetoxy cure silicones currently available. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Starts at $11.19
Technical Data Sheet

Safety Data Sheet
SS-69 High Strength, High Temperature Adhesive Sealant
SS-69 High Strength, High Temperature Adhesive Sealant
Description: SS-69 is a high strength, high temperature silicone RTV engineered for applications requiring fast development of physical properties and excellent adhesion. SS-69 offers the highest temperature resistance of any acetoxy cure silicone currently available. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Starts at $11.19
Technical Data Sheet

Safety Data Sheet
SS-690 High Temperature Coating
SS-690 High Temperature Coating
Description: SS-690 is a fast cure silicone RTV rubber developed for coating applications to resist weathering, moisture, UV and temperatures up to 330C. SS-690 will bond to ceramic, metals and composites to form a high temperature coating that can be utilized within 24 hours of application.

  • Flue gas handling and ducting
  • Smokestacks
  • Protecting ceramic and metal stacks from corrosion and premature wear
Starts at $10.41
Technical Data Sheet

Safety Data Sheet
SS-67F Low Durometer Silicone Rubber Parts Bonder
SS-67F Low Durometer Silicone Rubber Parts Bonder
Description: SS-67F is a fast curing, high strength, 1-part acetoxy silicone RTV adhesive rubber developed for silicone rubber bonding. SS-67F is intended for lower durometer applications.

  • Silicone rubber bonding and splicing
  • Silicone component fabrication
  • Prosthetic assembly and repair
Starts at $11.19
Technical Data Sheet

Safety Data Sheet
AA-106 - RTV106 Offset
AA-106 - RTV106 Offset
Description: AA-106 is a fast curing, high strength acetoxy silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and excellent adhesion. AA-106 is a 1-part silicone that when applied to the substrate allows handling of the bonded assembly within minutes.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Starts at $6.42
Technical Data Sheet

Safety Data Sheet
SS-108 High Strength, Fast Cure Acetoxy Adhesive - RTV 108 Offset
SS-108 High Strength, Fast Cure Acetoxy Adhesive - RTV 108 Offset
Description: SS-108 is a fast curing, high strength acetoxy silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and excellent adhesion. SS-108 is a 1-part silicone that when applied to the substrate allows handling of the bonded assembly within minutes.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Starts at $5.35
Technical Data Sheet

Safety Data Sheet
SS-109 High Strength, Fast Cure Acetoxy Adhesive - RTV 109 Offset
SS-109 High Strength, Fast Cure Acetoxy Adhesive - RTV 109 Offset
Description: SS-109 is a fast curing, high strength acetoxy silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and excellent adhesion. SS-109 is a 1-part silicone that when applied to the substrate allows handling of the bonded assembly within minutes.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Starts at $5.35
Technical Data Sheet

Safety Data Sheet
SS-301 Fast Cure Adhesive With Fast Onset Of Adhesion
SS-301 Fast Cure Adhesive With Fast Onset Of Adhesion
Description: SS-301 is a fast curing silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and fast unprimed adhesion. SS-301 is a 1-part silicone that when applied to the substrate allows handling of the bonded assembly within an hour. When cured, the elastomer resists weathering ozone, moisture, UV and high temperatures.

  • Industrial bonding
  • Form in place gaskets
  • Adhesive Sealant
Starts at $5.40
Technical Data Sheet

Safety Data Sheet
SS-301A EPDM and Difficult Substrates Adhesive
SS-301A EPDM and Difficult Substrates Adhesive
Description: SS-301A is a fast curing silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and fast unprimed adhesion. SS-301A is a 1-part silicone that when applied to the substrate allows handling of the bonded assembly within an hour. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Industrial bonding
  • Form in place gaskets
  • Adhesive Sealant
Starts at $6.89
Technical Data Sheet

Safety Data Sheet
SS-301CU Very High Temperature Resistant - 101 Ultra Copper Offset
SS-301CU Very High Temperature Resistant - 101 Ultra Copper Offset
Description: SS-301Cu is a fast curing silicone RTV adhesive rubber developed for high temperature applications requiring fast development of physical properties and fast unprimed adhesion. SS-301Cu is a 1-part silicone that when applied to the substrate, allows handling of the bonded assembly within an hour. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Starts at $6.02
Technical Data Sheet

Safety Data Sheet
SS-307 Low Modulus Silicone RTV Adhesive Sealant - Minimum Qty of 6
SS-307 Low Modulus Silicone RTV Adhesive Sealant - Minimum Qty of 6
Description: SS-307 is a low modulus silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and fast unprimed adhesion.

  • Industrial bonding
  • Form in place gaskets
  • Adhesive sealant
Price: $12.00

Technical Data Sheet

Safety Data Sheet
SS-333 Tin-Free Silicone RTV Adhesive Sealant
SS-333 Tin-Free Silicone RTV Adhesive Sealant
Description: SS-333 is a non-tin curing silicone RTV adhesive sealant rubber developed for applications requiring fast development of physical properties and fast unprimed adhesion.

  • Reversion resistant adhesives
  • Marine assemblies
  • Electronics tin sensitive coatings
  • With addition cured silicones
Starts at $5.89
Technical Data Sheet

Safety Data Sheet
SS-433T Fast Neutral Cure Low Viscosity Adhesive
SS-433T Fast Neutral Cure Low Viscosity Adhesive
Description: SS-433T is a fast curing silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and fast unprimed adhesion SS-433T is a 1-part silicone that when applied to the substrate allows handling of the bonded assembly within an hour. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Industrial bonding
  • Assembly line adhesive
  • Adhesive sealant
Starts at $5.09
Technical Data Sheet

Safety Data Sheet
SS-4333 Fast Cure Silicone RTV Adhesive Sealant
SS-4333 Fast Cure Silicone RTV Adhesive Sealant
Description: SS-4333 is a fast curing silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and fast unprimed adhesion.

  • Industrial bonding
  • Assembly line adhesive
  • Adhesive sealant
Starts at $4.50
Technical Data Sheet

Safety Data Sheet
SS-650+ High Temperature Fast Cure Adhesive Sealant
SS-650+ High Temperature Fast Cure Adhesive Sealant
Description: SS-650+ is a high strength, high temperature silicone RTV engineered for applications requiring fast development of physical properties and excellent adhesion.

  • Assembly Line Adhesive
  • Form in Place Gaskets
  • Adhesive Sealant
Starts at $17.41
Technical Data Sheet

Safety Data Sheet
SS-2321 1-Part Heat Cure Silicone Rubber
SS-2321 1-Part Heat Cure Silicone Rubber
Description: SS-2321 is a heat curing, high strength silicone RTV adhesive rubber developed for silicone rubber applications requiring a translucent, tough rubber product.

  • Silicone rubber parts
  • Bonding glass parts
  • Heat cured adhesive
Starts at $21.45
Technical Data Sheet

Safety Data Sheet
SS-3045 1 Part Heat Cure, Thixotropic Adhesive. Must Be Refrigerated!
SS-3045 1 Part Heat Cure, Thixotropic Adhesive.  Must Be Refrigerated!
Description: SS-3045 is a heat curing, high strength silicone adhesive rubber developed for applications requiring fast development of physical properties and excellent adhesion. SS-3045 is a 1-part silicone that when applied to the substrate and thermally cured, allows handing of the bonded assembly within minutes.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Starts at $13.49
Technical Data Sheet

Safety Data Sheet
AA-3147 - DC3145 Offset
AA-3147 - DC3145 Offset
Description: AA-3147 is a high strength, neutral curing silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and fast unprimed adhesion. AA-3147 is a 1-part silicone that allows handling of the bonded assembly within 1 hour of application to the substrate. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Assembly line adhesive
  • Component assembly
  • Industrial adhesive sealant
Starts at $15.07
Technical Data Sheet

Safety Data Sheet
AA-3147G Gray - DC3145 Gray Offset
AA-3147G Gray - DC3145 Gray Offset
Description: AA-3147G is a high strength, neutral curing silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and fast unprimed adhesion. AA-3147G is a 1-part silicone that allows handling of the bonded assembly within 1 hour of application to the substrate. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Assembly line adhesive
  • Component assembly
  • Industrial adhesive sealant
Starts at $15.07
Technical Data Sheet

Safety Data Sheet
SS-3147 High Strength, Neutral Cure Adhesive Sealant
SS-3147 High Strength, Neutral Cure Adhesive Sealant
Description: SS-3147 is a high strength, neutral curing silicone RTV adhesive rubber that was developed for applications requiring fast development of physical properties and fast unprimed adhesion. SS-3147 is a 1-part silicone that allows handling of the bonded assembly within one hour of application to the substrate. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Assembly line adhesive
  • Component assembly
  • Industrial adhesive sealant
Starts at $40.83
Technical Data Sheet

Safety Data Sheet
SS-3148 Selective Adhesion Neutral Cure Silicone RTV Adhesive Sealant
SS-3148 Selective Adhesion Neutral Cure Silicone RTV Adhesive Sealant
Description: SS-3148 is a selective adhesion, neutral curing silicone RTV adhesive rubber developed for applications requiring fast development of physical properties.

  • Assembly line adhesive
  • Component assembly
  • Adhesive sealant
Starts at $22.28
Technical Data Sheet

Safety Data Sheet
SS-5001 1 Part Self-Leveling Acetoxy Cure RTV - RTV 118 Offset
SS-5001 1 Part Self-Leveling Acetoxy Cure RTV - RTV 118 Offset
Description: SS-5001 is a 1-part silicone RTV developed for coating applications. SS-5001 offers unprimed adhesion to many metals and plastics. When cured, SS-5001 results in a very flexible and durable silicone adhesive coating. The elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Coating assemblies
  • Industrial sealing
  • Thin section potting & encapsulation
Starts at $5.39
Technical Data Sheet

Safety Data Sheet
SS-5005 Self-leveling Silicone RTV Adhesive Coating
SS-5083 UV Dual Cure Silicone Adhesive Sealant
SS-5083 UV Dual Cure Silicone Adhesive Sealant
Description: SS-5083 is a UV dual cure, high strength acetoxy silicone RTV adhesive rubber developed for UV applications.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Starts at $9.31
Technical Data Sheet

Safety Data Sheet
SS-5293 UV Dual Cure Adhesive - 3 Oz Tube - Loctite 5293 Offset
SS-5293 UV Dual Cure Adhesive - 3 Oz Tube - Loctite 5293 Offset
Description: SS-5293 is a UV dual cure neutral silicone RTV adhesive rubber developed for applications requiring fast UV cure. SS-5293 is a 1-part silicone that when applied and cured, allows handling of the bonded assembly within seconds. A secondary moisture cure enables full curing in shadowed areas. SS-5293 works well in manual and automatic dispensing equipment.

  • Assembly line adhesive
  • Conformal coating
  • Adhesive sealant
Price: $19.80

Technical Data Sheet

Safety Data Sheet
SS-5293-3000 UV Dual Cure Adhesive, 3,000Cps, 3 Oz Tubes Only
SS-5293-3000 UV Dual Cure Adhesive, 3,000Cps, 3 Oz Tubes Only
Description: SS-5293-3000 is a UV dual cure neutral silicone RTV adhesive rubber developed for UV applications. SS-5293-3000 is a 1-part silicone that when applied to the substrate allows handling of the bonded assembly within seconds. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. SS-5293-3000 works well in manual and automatic dispensing equipment.

  • Assembly line adhesive
  • Form in place gaskets
  • Adhesive sealant
Price: $20.88

Technical Data Sheet

Safety Data Sheet
SS-6001 Self-Leveling, Neutral Cure Adhesive
SS-6001 Self-Leveling, Neutral Cure Adhesive
Description: SS-6001 is a 1-part silicone RTV developed for coating applications. SS-6001 offers unprimed adhesion to many metals and plastics. When cured, SS-6001 results in a very durable silicone adhesive coating. The elastomer resists weathering, ozone, moisture, UV and high temperature.

  • Coating assemblies
  • Industrial sealing
  • Thin section potting & encapsulation
Starts at $3.99
Technical Data Sheet

Safety Data Sheet
SS-6001T 20K Self-Leveling, Neutral Cure Adhesive
SS-6001T 20K Self-Leveling, Neutral Cure Adhesive
Description: SS-6001T 20K is a 1-part silicone RTV developed for coating applications. SS-6001T 20K offers unprimed adhesion to many metals and plastics. When cured, SS-6001T 20K results in a very durable silicone adhesive coating. The elastomer resists weathering, ozone, moisture, UV and high temperature.

  • Coating assemblies
  • Industrial sealing
  • Thin section potting & encapsulation
Starts at $4.39
Technical Data Sheet

Safety Data Sheet
SS-6002 Conformal Coating - 3 Oz Tube - DC 3-1753 Offset
SS-6002 Conformal Coating - 3 Oz Tube - DC 3-1753 Offset
Description: SS-6002 is a 1-part silicone RTV developed for conformal coating and seam filling applications. SS-6002 offers unprimed adhesion to many metals and plastics. When cured, SS-6002 results in a very flexible and durable silicone adhesive coating. The elastomer resists weathering, ozone, moisture, UV and high temperatures.

  • Conformal coating
  • Industrial sealing
  • Thin sections potting & encapsulation
Price: $8.64

Technical Data Sheet

Safety Data Sheet